[App_rpt-users] duplex=2, hear myself, repeater

[kk6ecm]

See update below


> On Feb 23, 2016, at 4:07 PM, kk6ecm <kk6ecm at gmail.com> wrote:
> 
> Issue with simpleusb on the Pi2. I implemented USB radio, and the problem went away. Modify modules,conf (no load simple, and load usbradio, and add usbradio.conf and usbradio_ tune_<node Numbers>.conf. Update rpt.conf. Recommend tuning per instructions.
> 
> May have missed something.
> 
> Thanks,
> Bob
> kk6ecm
> 73
> 
> Sent from iPad
> 
> 
>> On Feb 23, 2016, at 3:56 PM, gregory <dropbox at digitalattack.org> wrote:
>> 
>> Hi all, in duplex=2 i can hear myself for just a sec when i unkey. Is the correct was to solve this is to change to duplex=3 and wire the rx radio audio out/cod to the tx radio audio in/ptt?
>> 
>> hardware = kenwood tx radio, kenwood rx radio, asterisk on pi2, uri, duplexer.
>> 
>> wiring PDF here
>> 
>> w6fbw.digitalattack.org/wiring.pdf
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.