[App_rpt-users] DTMF Passing on RTCM voter system

[Jesse Lloyd]

Hi All,

I have a very simple setup. We're building a stand alone repeater with one
voting receiver and putting a WLAN link it to tie the two together.

So rpt.conf
[1]
rxchannel =  Voter/1
duplex = 2
hangtime=100
althangtime=100
totime = 495000

voter.conf
[general]
port = 667
buflen = 125
password = ****

[1]
client1 = rtcm1,transmit,master
client2 = rtcm2
txctcss = 100.0
txctcsslevel = 30
txtoctype = phase
txprelim = yes
thresholds = 255,1=10:20
mixminus = y

About as simple as it gets.  I have a device with requires me to poll it
via DTMF. As it stands I can't get DTMF to repeat out of the transmitter.
App-rpt mutes the audio. Any ideas on how I can get this to work? I don't
need to control any of asterisk's functions with DTMF. I can
see chan_voter.c:1529 voter_mix_and_send: Voter 1 Got DTMF char 5 so I know
it's decoding.

Everything I've read deals with sending DTMF to another node and out to RF,
but this is keeping DTMF inside the same node.

Thanks,
Jesse
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160224/6a67bddc/attachment.html>