[App_rpt-users] RxCTCSSfreqs / EchoLink

[kk6ecm]

Location may depend on your version of app_rpt... the following file in the
DIAL src files contains the list of ctcss frequencies. Changes at this level
will require editing code and recompiling. CTCSS codes are considered a
standard for all radios. In other words, you may make the change to app_rpt,
but may not find a radio that can implement it.

/usr/src/astsrc-1.4.23-pre/asterisk/channels/xpmr/xpmr_coef.h 

http://docs.allstarlink.org/drupal/search/node/telemetry


Bob
kk6ecm

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Mahler
Sent: Sunday, February 28, 2016 5:38 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] RxCTCSSfreqs / EchoLink

Does anyone have information on ...

1) In rpt.conf, setting variable rxctcssfreqs, where is the table of 
valid RX tones?

2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to 
the number of tones added to the list?

3) Can the EchoLink section be configured to say ... W9YB Connected ... 
but NOT say ... to node 41111?

...STeve
KF5VH

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.