[App_rpt-users] 2 nodes using DIAL on a RPI2

[Keith Goobie]

Great news.   

Bet you are running into isn contention at this point.  A single usb  bus can handle two fobs from my experience.  

Keith

Sent from my iPhone

> On Jan 1, 2016, at 10:30 AM, Ramesh Dhami (VA3UV) <Ramesh at va3uv.com> wrote:
> 
>> On 30/12/2015 8:47 AM, Ramesh Dhami wrote:
>> Hi All:
>> 
>> Can you have 2 nodes on a RPI2, one with app_rpt (full DSP capabilities, full duplex) and the second with chan_simple_usb - simplex?
>> 
>> The last time I tried this with ACID, it didn't let me use both channel drivers simultaneously, i had to choose one or the other.
> 
> <--- Hi All:  Just an update to my own post, based on some experimenting and factual experience....
> 
> It is indeed possible to mix channel drivers chan_usbradio AND chan_simpleusb) - no issues whatsoever!
> 
> I have in fact, now added a third full duplex repeater system using chan_usbradio.
> 
> So my arrangement is now:
> 
> 2 full duplex repeaters (using chan_usbradio / DSP capabilities) and 1 simplex node using chan_simpleusb.
> 
> Best wishes for 2016.
> 
> Cheers!
> 
> Ramesh.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.