[App_rpt-users] Echolink Connection Issue

[kk6ecm]

That red glow you see in the west this evening is not the setting sun, but
the radiation from my red face... ugh!... I moved every piece of the setup
but the UDP addresses last week, and forgot I still needed to take care of
that one little detail. (sigh!)

Thanks much,
Bob
kk6ecm
"I get by with a little help from my friends." (Yup, I'm that old :-)

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of mike at midnighteng.com
Sent: Sunday, January 03, 2016 3:36 PM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Echolink Connection Issue

Outside the obvious...
..One connection per Internet IP

..Proper port forwarding for udp 5198 & 5199 (if you are on a dhcp, your ip
may
have changed)

..changing echolink servers in set-up

I wouldn't have a clue ;)

...mike/kb8jnm

> Just setup a new node (42928) using DIAL on a RPi which is registering on
> both the Allstar and Echolink (518309) sites, showing up as valid on all
> lists. The repeater works fine with radio calls, and incoming Allstarlink
> node connections, but not from Echolink. CLI> indicates successful
reception
> from the Echolink servers... no errors or warnings of any type in CLI>.
The
> node just does not see any incoming contacts from Echolink. Any ideas?
>
> By the way, simpleusb has way too much audio delay... hear whole words
after
> unkeying. Whereas it's not as noticable using usbradio.
>
> Thanks,
> Bob
> kk6ecm
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
to the
> bottom of the page. Enter your email address and press the "Unsubscribe or
edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If
> you have trouble unsubscribing, please send a message to the list
detailing the
> problem.
>


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.