[App_rpt-users] Noob question

[Greg Mohr]

I just connected my repeater a Motorola GM500R  With a Maxtrac M10 receiver and M120 TX.  The jumper on the board is set to B on the RX.  When I try to connect to a node I get a node # Connection Failed.  Not sure as to what to do , I am not a current Linux fan nor as good with the command line interface as I used to be 20yrs ago working on Linux servers for EDS and AT&T.  I made a change on the web portal and then selected download, I saw the following come up on my local node system:

Connected to Asterisk 1526 currently running on AllStar (pid = 684)
[Jan 23 19:18:34] NOTICE[697]: cryptostub.c:42 stub_ast_key_get: Crypto support not loaded!
[Jan 23 19:18:34] WARNING[697]: chan_iax2.c:6750 authenticate_verify: requested inkey 'allstar' for RSA authentication does not exist
[Jan 23 19:18:34] NOTICE[697]: chan_iax2.c:9459 socket_process: Host 67.215.233.178 failed to authenticate as allstar-sys

Any suggestions or direction on the above two issues would be appreciated.

Thank you,

Greg
W2GCM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160124/e2bdb3af/attachment.html>