[App_rpt-users] Question

Mon Jan 25 23:42:10 UTC 2016

I have a couple of people coming in and linking up while I am testing. Is there a way to forcibly disconnect the link without having to reboot the system.  The link commands for COP or disconnecting all do not seem to work.

Any help in troubleshooting would be greatly appreciated.

73, Greg W2GCM

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of app_rpt-users-request at ohnosec.org
Sent: Saturday, January 23, 2016 3:46 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 83, Issue 37

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

Today's Topics:

   1. Re: proxy registraltion (Bryan D. Boyle)
   2. Re: proxy registraltion (Steve Zingman)
   3. Re: proxy registraltion (Bryan D. Boyle)

----------------------------------------------------------------------

Message: 1
Date: Sat, 23 Jan 2016 13:42:45 -0500
From: "Bryan D. Boyle" <bdboyle at bdboyle.com>
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] proxy registraltion
Message-ID: <F6D0182B-9938-4225-8724-4267BEA28CE7 at bdboyle.com>
Content-Type: text/plain; charset="us-ascii"

read the proxy docs that scott referenced on ohnosec; I'm pretty much doing EXACTLY what it says there.  I've a Pi, running DIAL , connected via a wifi dongle plugged into the Pi into an LTE hotspot, which I can throw in my car along with the radios and duplexer and have a mobile repeater with full allstar capabilities.  The reason the proxy, it seems, exists is that the LTE IP address is a fungible/transient  thing, which allstar doesn't handle very well as you traverse across tower boundaries.  So, in order to have a mobile node, you stand up a proxy, as Scott has done to handle a few of us hackers on our network, and configure alkstar to talk TO IT instead of directly to the mother ship of the allstar network.

I'm using an Official Node Assignment. It has registered with Allstarlink before. It's number is 42761.  it shows up in the master node list, in my server listing, and in my allmon.  It does NOT, however, show up in the active nodes listing, which means that, regardless of whether i can connect to it, according to allstar, it's not marked as active.  My question revolves around how to get it to show up in the active nodes list when it registers via a proxy server.  I can connect it, but it's hidden in the active node list, even though even my allmon instance sees it.  

--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

> On Jan 23, 2016, at 12:19, Stacy <kg7qin at arrl.net> wrote:
> 
> Sounds like you are asking if you can register with more than one system using the same node ID number.
> 
> If you look at your iax.conf file, you will see a line similar to:
> 
> register=<nodenumber>:<password>@site
> 
> <nodenumber> = your node number
> <password> = your password
> 
> What you haven't told us is what node number you are registering as.  Are you actually using your AllStar node number or are you using a private node number in the range of 1xxx?
> 
> I'm not sure how AppRpt will handle having a single node number registered on multple systems, although the underlying registration process is handled by asterisk and not AppRpt itself.  It "should" work, but you never know until you try it out.  You would just have to make sure that if you tried this, you aren't bringing in the same audio source from multiple channels (effectively bridging them), since the results would not be pretty -- especially if there are any delays.
> 
> 
> 
> You can setup multiple nodes with different node numbers and register to different systems.
> 
> Take a look here for more information:
> 
> http://ohnosec.org/drupal/node/49
> 
> -Stacy
> 
>> On 01/22/2016 08:03 PM, Bryan D. Boyle wrote:
>> Have a quick question...I've built a DIAL node on a Pi and have (with some great help from Scott KB2EAR) successufully brought it up on an LTE hotspot via wifi, and am using his hub as a proxy, successfully registering (and working) through his hub.
>> 
>> I'm registering to his hub, not the allstarlink registry; so this means that, for whatever reason (assuming because I don't touch the registry...but wouldn't the proxy do that?) I don't show up in the active nodes list.
>> 
>> If this is correct, and assuming you can't register to more than one registry (is that redundant?), is there a work around that would let me proxy my connection, but still also show me as active in the allstar database?  
>> 
>> Does this make sense (I'm building out a portable repeater, but want 
>> to have a full asterisk instance running rather than an RTCM 
>> solution, and the Pi, couple GM300s, URI, and mobile duplexer makes 
>> for a nice portable node.  Not to mention that if I take the Pi, URI, 
>> and hotspot sans radios, I built a speaker amp & Mic interface that 
>> plugs into the URI that gives me asterisk connectivity without the 
>> radios...in a hotel room or some such...)
>> 
>> Just throwing this out there...TIA.
>> --
>> Bryan
>> Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
>> 
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160123/a873a055/attachment-0001.html>

------------------------------

Message: 2
Date: Sat, 23 Jan 2016 13:53:23 -0500
From: Steve Zingman <szingman at msgstor.com>
To: "Bryan D. Boyle" <bdboyle at bdboyle.com>
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] proxy registraltion
Message-ID: <-1914846469090443048 at unknownmsgid>
Content-Type: text/plain; charset="utf-8"

Did you try a second register line in iax.conf?

Sent via smoke signal (Verizon)
On Jan 23, 2016 1:51 PM, "Bryan D. Boyle" <bdboyle at bdboyle.com> wrote:

read the proxy docs that scott referenced on ohnosec; I'm pretty much doing EXACTLY what it says there.  I've a Pi, running DIAL , connected via a wifi dongle plugged into the Pi into an LTE hotspot, which I can throw in my car along with the radios and duplexer and have a mobile repeater with full allstar capabilities.  The reason the proxy, it seems, exists is that the LTE IP address is a fungible/transient  thing, which allstar doesn't handle very well as you traverse across tower boundaries.  So, in order to have a mobile node, you stand up a proxy, as Scott has done to handle a few of us hackers on our network, and configure alkstar to talk TO IT instead of directly to the mother ship of the allstar network.

I'm using an Official Node Assignment. It has registered with Allstarlink before. It's number is 42761.  it shows up in the master node list, in my server listing, and in my allmon.  It does NOT, however, show up in the active nodes listing, which means that, regardless of whether i can connect to it, according to allstar, it's not marked as active.  My question revolves around how to get it to show up in the active nodes list when it registers via a proxy server.  I can connect it, but it's hidden in the active node list, even though even my allmon instance sees it.

--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

On Jan 23, 2016, at 12:19, Stacy <kg7qin at arrl.net> wrote:

Sounds like you are asking if you can register with more than one system using the same node ID number.

If you look at your iax.conf file, you will see a line similar to:

register=<nodenumber>:<password>@site

<nodenumber> = your node number
<password> = your password

What you haven't told us is what node number you are registering as.  Are you actually using your AllStar node number or are you using a private node number in the range of 1xxx?

I'm not sure how AppRpt will handle having a single node number registered on multple systems, although the underlying registration process is handled by asterisk and not AppRpt itself.  It "should" work, but you never know until you try it out.  You would just have to make sure that if you tried this, you aren't bringing in the same audio source from multiple channels (effectively bridging them), since the results would not be pretty -- especially if there are any delays.

You can setup multiple nodes with different node numbers and register to different systems.

Take a look here for more information:

http://ohnosec.org/drupal/node/49

-Stacy

On 01/22/2016 08:03 PM, Bryan D. Boyle wrote:

Have a quick question...I've built a DIAL node on a Pi and have (with some great help from Scott KB2EAR) successufully brought it up on an LTE hotspot via wifi, and am using his hub as a proxy, successfully registering (and
working) through his hub.

I'm registering to his hub, not the allstarlink registry; so this means that, for whatever reason (assuming because I don't touch the registry...but wouldn't the proxy do that?) I don't show up in the active nodes list.

If this is correct, and assuming you can't register to more than one registry (is that redundant?), is there a work around that would let me proxy my connection, but still also show me as active in the allstar database?

Does this make sense (I'm building out a portable repeater, but want to have a full asterisk instance running rather than an RTCM solution, and the Pi, couple GM300s, URI, and mobile duplexer makes for a nice portable node.  Not to mention that if I take the Pi, URI, and hotspot sans radios, I built a speaker amp & Mic interface that plugs into the URI that gives me asterisk connectivity without the radios...in a hotel room or some such...)

Just throwing this out there...TIA.
--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

_______________________________________________
App_rpt-users mailing
listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160123/ce7a8a93/attachment-0001.html>

------------------------------

Message: 3
Date: Sat, 23 Jan 2016 15:45:28 -0500
From: "Bryan D. Boyle" <bdboyle at bdboyle.com>
To: Steve Zingman <szingman at msgstor.com>
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] proxy registraltion
Message-ID: <0A85E18D-F8B4-4973-BCCB-EC746F9173AE at bdboyle.com>
Content-Type: text/plain; charset="us-ascii"

had thought of that...but was wondering what the implication would be of allstar seeing the same node number being registeredfrom two different IP addresses.

--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

> On Jan 23, 2016, at 13:53, Steve Zingman <szingman at msgstor.com> wrote:
> 
> Did you try a second register line in iax.conf?
> 
> Sent via smoke signal (Verizon)
> 
> On Jan 23, 2016 1:51 PM, "Bryan D. Boyle" <bdboyle at bdboyle.com> wrote:
> read the proxy docs that scott referenced on ohnosec; I'm pretty much doing EXACTLY what it says there.  I've a Pi, running DIAL , connected via a wifi dongle plugged into the Pi into an LTE hotspot, which I can throw in my car along with the radios and duplexer and have a mobile repeater with full allstar capabilities.  The reason the proxy, it seems, exists is that the LTE IP address is a fungible/transient  thing, which allstar doesn't handle very well as you traverse across tower boundaries.  So, in order to have a mobile node, you stand up a proxy, as Scott has done to handle a few of us hackers on our network, and configure alkstar to talk TO IT instead of directly to the mother ship of the allstar network.
> 
> I'm using an Official Node Assignment. It has registered with Allstarlink before. It's number is 42761.  it shows up in the master node list, in my server listing, and in my allmon.  It does NOT, however, show up in the active nodes listing, which means that, regardless of whether i can connect to it, according to allstar, it's not marked as active.  My question revolves around how to get it to show up in the active nodes list when it registers via a proxy server.  I can connect it, but it's hidden in the active node list, even though even my allmon instance sees it.  
> 
> --
> Bryan
> Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
> 
> 
> 
> On Jan 23, 2016, at 12:19, Stacy <kg7qin at arrl.net> wrote:
> 
> Sounds like you are asking if you can register with more than one system using the same node ID number.
> 
> If you look at your iax.conf file, you will see a line similar to:
> 
> register=<nodenumber>:<password>@site
> 
> <nodenumber> = your node number
> <password> = your password
> 
> What you haven't told us is what node number you are registering as.  Are you actually using your AllStar node number or are you using a private node number in the range of 1xxx?
> 
> I'm not sure how AppRpt will handle having a single node number registered on multple systems, although the underlying registration process is handled by asterisk and not AppRpt itself.  It "should" work, but you never know until you try it out.  You would just have to make sure that if you tried this, you aren't bringing in the same audio source from multiple channels (effectively bridging them), since the results would not be pretty -- especially if there are any delays.
> 
> 
> 
> You can setup multiple nodes with different node numbers and register to different systems.
> 
> Take a look here for more information:
> 
> http://ohnosec.org/drupal/node/49
> 
> -Stacy
> 
> On 01/22/2016 08:03 PM, Bryan D. Boyle wrote:
> Have a quick question...I've built a DIAL node on a Pi and have (with some great help from Scott KB2EAR) successufully brought it up on an LTE hotspot via wifi, and am using his hub as a proxy, successfully registering (and working) through his hub.
> 
> I'm registering to his hub, not the allstarlink registry; so this means that, for whatever reason (assuming because I don't touch the registry...but wouldn't the proxy do that?) I don't show up in the active nodes list.
> 
> If this is correct, and assuming you can't register to more than one registry (is that redundant?), is there a work around that would let me proxy my connection, but still also show me as active in the allstar database?  
> 
> Does this make sense (I'm building out a portable repeater, but want to have a full asterisk instance running rather than an RTCM solution, and the Pi, couple GM300s, URI, and mobile duplexer makes for a nice portable node.  Not to mention that if I take the Pi, URI, and hotspot sans radios, I built a speaker amp & Mic interface that plugs into the URI that gives me asterisk connectivity without the radios...in a hotel room or some such...)
> 
> Just throwing this out there...TIA.
> --
> Bryan
> Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160123/74561913/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

End of App_rpt-users Digest, Vol 83, Issue 37
*********************************************