[App_rpt-users] usbfobs

[Steven Donegan]

I would ask a different question - why do we still use slow USB devices rather than ones directly attached to the Pi's bus?
 Steven Donegan
KK6IVC General Class FCC License
FAA PP-ASEL Pilots License
Silver State Car #86
www.sscc.us

      From: David McGough <kb4fxc at inttek.net>
 To: app_rpt mailing list <app_rpt-users at ohnosec.org> 
 Sent: Tuesday, July 5, 2016 5:40 PM
 Subject: Re: [App_rpt-users] usbfobs
   

Steve,

The CM108/CM119 is nowhere near dead! Even if CM stops manufacture, there
will be decent "clones" of it for years to come. No worries about that!

If you're needing some FOBs, I understand the shipping issues you've got,
being in NZ. I just checked the US Postal Service shipping site and a
"First Class Mail International Large Envelope" is under $20USD for 2
lbs., shipped from the USA to NZ.  Priority mail, where you could ship a
small box in under a week, starts at about $64USD.  See:

https://ircalc.usps.com/?country=10324


Why not just work a "bulk quantity" deal with Kevin or Scott to sell you
and ship you a hand full of their RIM-lite adapters???  Then, you'll in
good shape for now.

http://www.repeater-builder.com/products/usb-rim-lite.html


73, David KB4FXC


On Wed, 6 Jul 2016, Steve Wright wrote:

> On 06/07/16 11:44, Kevin Custer wrote:
> > Soldering a 48 pin LQFP and having it be fake is nothing short of a 
> > bad experience.  Like Scott, I recently purchased a fair quantity of 
> > CM119A's from a top CM distributor.  They told us the CM119 and CM119A 
> > are now legacy products and the CM119B is current. Unfortunately, the 
> > B model doesn't use a crystal and several developers agree that they 
> > may not be suitable for digital and analog radio adapter 
> > applications.  There were still a few hundred CM119A's in the 
> > distribution chain as of a few months ago.
> 
> If the CM119 is dead, then we should scrap it.  I can't really see why 
> we are focussing on that devices' built-in I/O, when we have computing 
> devices such as RPI3 with scads of easily accessible I/O.
> 
> Linux sound is really well developed - "just works everywhere" I'd say.  
> Why not build or reuse a DSP-based driver for that, that will handle 
> voting - now we are in business with all the toys, for the foreseeable 
> future.  Likely a simple CLI config tool could be developed too - choose 
> RX audio device, TX audio device, signalling, save settings, done.  
> Rinse and repeat for three devices.
> 
> Hardware VOTERs are fine for a single repeater with a few outboard 
> receivers, but way too much money for non-millionaire clubs to convert 
> "everything" to asterisk - they will stick with their IRLP node for 
> sure, and that is a tragedy..  I see a few members here and elsewhere 
> make it their business to put tens of thousands of $$ into communication 
> systems, and that's enviable and laudable, but 90% of constructors don't 
> exist on that rarefied plane.
> 
> 
> S
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160706/d41f3645/attachment.html>