[App_rpt-users] SIP

Sat Jun 4 14:56:31 UTC 2016

That was it!

I have a Linksys ATA, could I set it up to connect also?

Thanks, 73, Greg

On 06/04/2016 10:47 AM, Bob Prybyzerski wrote:
> Not sure if you checked this yet but depending on your version of 
> Allstar, sip is not enabled by default. Check modules.conf for noload 
> sip and comment it out.
> This is how I set my sip phone up.
> http://www.w2ymm.com/myallstarlink.html#sip_phone
>
> Bob w2ymm
>
> Sent from my iPhone
> Bob Prybyzerski
> 631-960-1051
> W2YMM
>
> On Jun 4, 2016, at 10:19 AM, Greg Thornwall <thorn at myactv.net 
> <mailto:thorn at myactv.net>> wrote:
>
>>
>> I'm not having much luck. It won't register. I tried inside the 
>> router and 2 different Allstar nodes and 3 different applications.  
>> Itried Sipdroid, SFLphone on Linux and I'm working on an Andriod App 
>> using the SIP libs. There's a walkietalkie example I'm trying to add 
>> to an Allstar control app I'm writing. I'll double check my settings 
>> again. This is on a BBB and Pi3.
>>
>> IAX works fine.
>>
>> tnx, 73 Greg KD3SU
>>
>> On 06/04/2016 12:00 AM, Mark Johnston wrote:
>>> If you have a sip phone or Application, you can connect to the node 
>>> with a phone to command it, and connect to other nodes just like a 
>>> radio - except it can use vox or dtmf to key the xmtr depending on 
>>> how it is configured.
>>>
>>> example using vox:
>>> extensions.conf:
>>>
>>>
>>> [radio-control]
>>>
>>> exten=1001,1,Answer
>>>
>>> exten=1001,n,Playback,rpt/node
>>>
>>> exten=1001,n,Rpt,1001|Pv
>>>
>>>
>>>
>>>
>>> If you want to access it from outside your home network, need to 
>>> have port 5060 forwarded to your allstar box - unless you change 
>>> that in sip.conf... then fwd to whatever other port is used, one big 
>>> downside to opening sip, is there tend to be a lot of 'people' from 
>>> other countries who try to hack/use your sip to place calls etc... 
>>> so one has to be careful with opening that service to the world, iax 
>>> is not as common... it is a bit safer to have 4569 open for iax - I 
>>> only use the SIP internally so I don't have that issue, and use iax 
>>> for other devices -
>>>
>>> Hope that helps...
>>>
>>> "Got Root?"
>>>
>>> How many software engineers does it take to change a light bulb?
>>> *None. It's a hardware problem.*
>>>
>>>
>>> Unix is user friendly. It's just very particular about who it's 
>>> friends are.
>>> WINDOWS: Will Install Needless Data On Whole System
>>> MICROSOFT: Most Intelligent Customers Realize Our Software Only 
>>> Fools Teenagers.
>>>
>>>
>>> A ntennas
>>> P oorly
>>> P laced
>>> L acks
>>> E ngineering
>>>
>>> The best way to accelerate a computer running Windows is at 9.81 m/s².
>>>
>>> /*_/"I get paid to support Windows, I use Linux to get work done."/_*/
>>>
>>>
>>> On Fri, Jun 3, 2016 at 8:47 PM, kk6ecm <kk6ecm at gmail.com 
>>> <mailto:kk6ecm at gmail.com>> wrote:
>>>
>>>     Mark, could you say a bit about how it is used?
>>>
>>>     Thanks,
>>>     Bob
>>>     k6ecm
>>>     73
>>>
>>>     Sent from iPad
>>>
>>>
>>>     On Jun 3, 2016, at 8:35 PM, Mark Johnston
>>>     <markjohnston73 at gmail.com> wrote:
>>>
>>>>     I use this in my sip.conf for the Polycom phone that I have here.
>>>>
>>>>
>>>>
>>>>     [polycom]
>>>>
>>>>     type=friend
>>>>
>>>>     context=radio-control
>>>>
>>>>     secret=yoursupersecretPW
>>>>
>>>>     host=dynamic
>>>>
>>>>     dtmfmode=rfc2833
>>>>
>>>>     username=polycom
>>>>
>>>>     disallow=all
>>>>
>>>>     allow=ulaw
>>>>
>>>>     progressinband=yes
>>>>
>>>>     transfer=no
>>>>
>>>>
>>>>     _______________________________________________
>>>>     App_rpt-users mailing list
>>>>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>     To unsubscribe from this list please visit
>>>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>>     scroll down to the bottom of the page. Enter your email address
>>>>     and press the "Unsubscribe or edit options button"
>>>>     You do not need a password to unsubscribe, you can do it via
>>>>     email confirmation. If you have trouble unsubscribing, please
>>>>     send a message to the list detailing the problem.
>>>
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160604/96e07d01/attachment.html>