[App_rpt-users] SIP
Bob Prybyzerski
w2ymm1 at gmail.com
Sat Jun 4 15:09:09 UTC 2016
That I am not familiar with. I stumbled into getting mine working and haven't tried to go much further.
Sent from my iPhone
Bob Prybyzerski
631-960-1051
W2YMM
> On Jun 4, 2016, at 10:56 AM, Greg Thornwall <thorn at myactv.net> wrote:
>
> That was it!
>
> I have a Linksys ATA, could I set it up to connect also?
>
> Thanks, 73, Greg
>
>> On 06/04/2016 10:47 AM, Bob Prybyzerski wrote:
>> Not sure if you checked this yet but depending on your version of Allstar, sip is not enabled by default. Check modules.conf for noload sip and comment it out.
>> This is how I set my sip phone up.
>> http://www.w2ymm.com/myallstarlink.html#sip_phone
>>
>> Bob w2ymm
>>
>> Sent from my iPhone
>> Bob Prybyzerski
>> 631-960-1051
>> W2YMM
>>
>> On Jun 4, 2016, at 10:19 AM, Greg Thornwall <thorn at myactv.net> wrote:
>>
>>>
>>> I'm not having much luck. It won't register. I tried inside the router and 2 different Allstar nodes and 3 different applications. I tried Sipdroid, SFLphone on Linux and I'm working on an Andriod App using the SIP libs. There's a walkietalkie example I'm trying to add to an Allstar control app I'm writing. I'll double check my settings again. This is on a BBB and Pi3.
>>>
>>> IAX works fine.
>>>
>>> tnx, 73 Greg KD3SU
>>>
>>>> On 06/04/2016 12:00 AM, Mark Johnston wrote:
>>>> If you have a sip phone or Application, you can connect to the node with a phone to command it, and connect to other nodes just like a radio - except it can use vox or dtmf to key the xmtr depending on how it is configured.
>>>>
>>>> example using vox:
>>>> extensions.conf:
>>>>
>>>>
>>>> [radio-control]
>>>>
>>>> exten=1001,1,Answer
>>>> exten=1001,n,Playback,rpt/node
>>>>
>>>> exten=1001,n,Rpt,1001|Pv
>>>>
>>>>
>>>>
>>>>
>>>> If you want to access it from outside your home network, need to have port 5060 forwarded to your allstar box - unless you change that in sip.conf... then fwd to whatever other port is used, one big downside to opening sip, is there tend to be a lot of 'people' from other countries who try to hack/use your sip to place calls etc... so one has to be careful with opening that service to the world, iax is not as common... it is a bit safer to have 4569 open for iax - I only use the SIP internally so I don't have that issue, and use iax for other devices -
>>>>
>>>> Hope that helps...
>>>>
>>>> "Got Root?"
>>>>
>>>> How many software engineers does it take to change a light bulb?
>>>> None. It's a hardware problem.
>>>>
>>>>
>>>> Unix is user friendly. It's just very particular about who it's friends are.
>>>> WINDOWS: Will Install Needless Data On Whole System
>>>> MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.
>>>>
>>>>
>>>> A ntennas
>>>> P oorly
>>>> P laced
>>>> L acks
>>>> E ngineering
>>>>
>>>> The best way to accelerate a computer running Windows is at 9.81 m/s².
>>>>
>>>> "I get paid to support Windows, I use Linux to get work done."
>>>>
>>>>
>>>>> On Fri, Jun 3, 2016 at 8:47 PM, kk6ecm <kk6ecm at gmail.com> wrote:
>>>>> Mark, could you say a bit about how it is used?
>>>>>
>>>>> Thanks,
>>>>> Bob
>>>>> k6ecm
>>>>> 73
>>>>>
>>>>> Sent from iPad
>>>>>
>>>>>
>>>>> On Jun 3, 2016, at 8:35 PM, Mark Johnston <markjohnston73 at gmail.com> wrote:
>>>>>
>>>>>> I use this in my sip.conf for the Polycom phone that I have here.
>>>>>>
>>>>>>
>>>>>>
>>>>>> [polycom]
>>>>>>
>>>>>> type=friend
>>>>>>
>>>>>> context=radio-control
>>>>>>
>>>>>> secret=yoursupersecretPW
>>>>>>
>>>>>> host=dynamic
>>>>>>
>>>>>> dtmfmode=rfc2833
>>>>>>
>>>>>> username=polycom
>>>>>>
>>>>>> disallow=all
>>>>>>
>>>>>> allow=ulaw
>>>>>>
>>>>>> progressinband=yes
>>>>>>
>>>>>> transfer=no
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160604/063815d8/attachment.html>
More information about the App_rpt-users
mailing list