[App_rpt-users] 40 channel remote base GM300!

[Mike - W5JR]

Skyler, very well done. 

tnx
Mike / W5JR
Alpharetta GA

> On Jun 22, 2016, at 12:03 PM, Skyler Fennell <electricity440 at gmail.com> wrote:
> 
> I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider. 
> 
> Binary select only lets me get to 16 channels, so my method controls the front panel directly. 
> 
> It's been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter. 
> 
> Here is the video
> 
> https://youtu.be/ZY9pfy5F4hw
> 
> 73
> Skyler KDØWHB
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160623/8a9d80da/attachment.html>