[App_rpt-users] ACID Error Lockup
Sione Ragle
ke6sth at ke6sth.ampr.org
Fri Mar 18 17:05:56 UTC 2016
Mine would lockup as well had to power cycle it, I upgraded to DIAL I
don't see that problem anymore. Been running DIAL for a while now I use
to have this lockup couple times a week.
On 3/18/2016 7:18 AM, mike at midnighteng.com wrote:
> If you have updated system files, you might want to re-compile.
>
> You might also want to turn off all built-in devices not in use in the bios set-up.
> (parallel,serial, sound, some usb hubs etc)
> IRQ / PNP issues. And force a update to the PNP data when done if not automatic.
>
> Process of elimination in the end.
>
> ...mike/kb8jnm
>
>
>> I have an ACID distribution running. Last night I ran an "astres.sh"
>> after minor change to the rpt.conf file, and everything went away. No
>> radio, no internet, just dead. Details below. Has anyone dealt with
>> this? {This is a Dell PC and an URI.}
>>
>> I went to the repeater site and found the monitor filled with
>> "cannot submit datapipe for urb 0, error -22: internal error"
>>
>> The last line was partially truncated. The keyboard was dead. Pressing
>> the power button did not start a shutdown. Finally holding the power
>> button down to dump the power and then restarting the machine brought
>> things back to life. Any information appreciated.
>>
>> ...STeve - KF5VH
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> bottom of the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If
>> you have trouble unsubscribing, please send a message to the list detailing the
>> problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
More information about the App_rpt-users
mailing list