[App_rpt-users] RTCM transmit adjustment

[James Cizek]

Hi all,


For those of you using RTCMs on your repeaters....  I was wondering what
procedure you use to set the TX level on your RTCM.  There are great tools
built into the RTCM/Allstar for setting squelch and RX levels, but TX is
left pretty much to your imagination.

Curious how folks are going about this.  On the hardware-only path
controllers (SCOM, Arcomm, etc...)  it's very clearly documented about how
they'd like you to set levels throughout the audio path. There is even
reasonably good documentation for setting TX levels with a URIx. The RTCM,
not so much.

I've got a few of the RTCMs deployed now and things sound really good, but
I am following my own made-up procedure based on what I think it should
be.  Got to wondering how others are doing it and if I could improve my
methods any.

Thanks for sharing!

James
KI0KN
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160510/c60a0ff3/attachment.html>