[App_rpt-users] RTCM transmit adjustment

[Tim Sawyer]

Set 'em the same way as any other device. Send a tone with cop,4 and adjust
(with the RTCM pot) for 3KHz (no P/L) on your service monitor.

for example:
*CLI> rpt cmd <node number> cop 4 <anything>

where <anything> = any string or number (command parser is kinda dumb)

Repeat above command (type up arrow) to stop tone.

On Tue, May 10, 2016 at 10:00 AM, James Cizek <james.m.cizek at gmail.com>
wrote:

> Hi all,
>
>
> For those of you using RTCMs on your repeaters....  I was wondering what
> procedure you use to set the TX level on your RTCM.  There are great tools
> built into the RTCM/Allstar for setting squelch and RX levels, but TX is
> left pretty much to your imagination.
>
> Curious how folks are going about this.  On the hardware-only path
> controllers (SCOM, Arcomm, etc...)  it's very clearly documented about how
> they'd like you to set levels throughout the audio path. There is even
> reasonably good documentation for setting TX levels with a URIx. The RTCM,
> not so much.
>
> I've got a few of the RTCMs deployed now and things sound really good, but
> I am following my own made-up procedure based on what I think it should
> be.  Got to wondering how others are doing it and if I could improve my
> methods any.
>
> Thanks for sharing!
>
> James
> KI0KN
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160510/4186f1d3/attachment.html>