[App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee

[Steve Agee]

Yes, and this works if everything is USBRADIO. But remember, one is 
USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.

N5ZUA

On 5/21/2016 5:13 PM, David McGough wrote:
> For any of the AllStar releases:
>
> Launch Asterisk from the command prompt.
>
> asterisk> radio active usb
> asterisk> radio tune save
>
> If two URI's are attached, perform:
>
> asterisk> radio active usb1
> asterisk> radio tune save
>
> If three URI's are attached, perform:
>
> asterisk> radio active usb2
> asterisk> radio tune save
>
> ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with
> what the AllStar software interprets the various devstr parameters to be.
>
> asterisk> exit
>
>
>
>
> On Sat, 21 May 2016, Steve Agee wrote:
>
>> Thanks, but as previously mentioned, this is DIAL and so your CLI
>> commands from XIPAR do not exist.
>>
>> N5ZUA
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160521/ec5f12e1/attachment.html>