[App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee

[David McGough]

For simpleusb, replace the word "radio" with "susb" ...Like:

asterisk> susb active usb
asterisk> susb tune save

And, the written config files will be like: simpleusb_tune_xxxx.conf



On Sat, 21 May 2016, Steve Agee wrote:

> Yes, and this works if everything is USBRADIO. But remember, one is 
> USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.
> 
> N5ZUA
> 
> On 5/21/2016 5:13 PM, David McGough wrote:
> > For any of the AllStar releases:
> >
> > Launch Asterisk from the command prompt.
> >
> > asterisk> radio active usb
> > asterisk> radio tune save
> >
> > If two URI's are attached, perform:
> >
> > asterisk> radio active usb1
> > asterisk> radio tune save
> >
> > If three URI's are attached, perform:
> >
> > asterisk> radio active usb2
> > asterisk> radio tune save
> >
> > ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with
> > what the AllStar software interprets the various devstr parameters to be.
> >
> > asterisk> exit
> >
> >