[App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee

[Steve Agee]

Yes, and already "been there, done that" but the light on the second 
URIx stays solid.

N5ZUA

On 5/21/2016 5:28 PM, David McGough wrote:
> For simpleusb, replace the word "radio" with "susb" ...Like:
>
> asterisk> susb active usb
> asterisk> susb tune save
>
> And, the written config files will be like: simpleusb_tune_xxxx.conf
>
>
>
> On Sat, 21 May 2016, Steve Agee wrote:
>
>> Yes, and this works if everything is USBRADIO. But remember, one is
>> USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.
>>
>> N5ZUA
>>
>> On 5/21/2016 5:13 PM, David McGough wrote:
>>> For any of the AllStar releases:
>>>
>>> Launch Asterisk from the command prompt.
>>>
>>> asterisk> radio active usb
>>> asterisk> radio tune save
>>>
>>> If two URI's are attached, perform:
>>>
>>> asterisk> radio active usb1
>>> asterisk> radio tune save
>>>
>>> If three URI's are attached, perform:
>>>
>>> asterisk> radio active usb2
>>> asterisk> radio tune save
>>>
>>> ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with
>>> what the AllStar software interprets the various devstr parameters to be.
>>>
>>> asterisk> exit
>>>
>>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160521/037416ce/attachment.html>