[App_rpt-users] DTMF to change frequency of serial transceiver

[Brett Friermood]

Found an email from Doug Crompton from the beginning of this year where he
mentions this how-to he wrote on using the asterisk dialplan to capture and
act on non-defined DTMF strings. I haven't looked at it in much detail but
a quick glance looks like it could be used for your purposes.

http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/Allstar_extended_functions_using_autopatch.pdf

Brett KQ9N

On Sun, Nov 13, 2016 at 11:31 PM, Skyler F <electricity440 at gmail.com> wrote:

> Is it possible to parse DTMF strings without an individual command for
> each possible DTMF code? I would like a way to switch the frequency of a
> transceiver with serial frequency input (dra-818) via DTMF string.
>
> I have not thought of a way to customize DTMF behaviour and not have
> static codes. This is a standard node, not remote base.
>
> Here is an example of what I would like to do:
>
> *98145145 = Change frequency to 145.145 MHz
> *97100 = Change CTCSS to 100.0 Hz
>
> I Do NOT have to do this through RPT.Conf. If anybody can tell me a way of
> getting RAW DTMF data through shell, that would be really great!
>
>
> 73
> Skyler KD0WHB
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20161114/44968895/attachment.html>