[App_rpt-users] DIAL Help Please

[Steve Zingman]

Did you run radio-tune-menu?
disable ctcss decode and try as carrier only.


On 10/08/2016 08:39 AM, Steve Mahler wrote:
> Good Morning!  I swapped PCs yesterday on my repeater, and now a big 
> problem.  Please, I need some help from  DIAL Wizards.
>
> The critical problem is the RX audio does not get transmitted, but all 
> other audio paths seem to work.  Additional information ...
>
> 1.  iaxRpt connects normally, and plays at normal level audio from the 
> RX, also transmitting  from iaxRpt goes to the TX at a normal level
>
> 2.  Links to other repeaters, no problem to hear distant audio, but RX 
> audio is not sent to the distant repeater (but goes out on other IAX 
> links)
>
> 3.  Playing audio files from app-rpt are heard on the transmitter at 
> normal levels.
>
> Configuration ...
>
> i)  RX is discriminator audio to URI, no COS/COR/PL signaling
>
> ii) TX is voice audio and a separate PL audio mixed in the radio.
>
> Process ...
>
> A.  I took a second PC and loaded DIAL.
>
> B.  I updated files in /etc/asterisk
>
> C.  usbradio_tune_usb42316.conf  and patched in the new devstr, but 
> left all the levels the same
>
> D.  usbradio_tune_usb42316.conf ... I noted the new  "fever=1" (and 
> have tried it at values 0 and 1) but have found no documentation for 
> fever.
>
> E.  I swapped the new PC for the old PC ... same URI, Ethernet, etc.  
> ... It worked, but I missed the RX to TX loss problem during the install.
>
> F.  Note, when you unkey the courtesy tone, tail messages, etc. play
>
> Thinking ...
>
> a.  It is like the DSP PL is not working but I am using the same 
> config I did under ACID
>
> b.  Setting  rxctcssoverride = 1 does not change the operation.
>
> ANY information about necessary changes between ACID and DIAL, or just 
> proper DIAL operation appreciated.  I would hate to have to reinstall 
> the ACID based PC.
>
> ...STeve - KF5VH
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic