[App_rpt-users] DIAL and radio-tune-menu

[Joe Bennett]

No more than 10 minutes after I wrote this email I found a post that 
outlined the problem I was having... Needed to load usbradio in 
modules.conf and now all is well... Sorry for the wasted bandwidth...



-Joe

KA3NAM


On 10/23/2016 9:29 PM, Joe Bennett wrote:
> Just got dial up and running with a Pi3. Initial setup looks good and 
> it has registered with the Allstar network.  Now I'm trying to use the 
> radio-tune-menu command but all I get is this:
>
> root at repeater:/etc/asterisk# radio-tune-menu
> Error parsing device parameters
> root at repeater:/etc/asterisk#
>
> I've checked that the rpt.conf and the usbradio.conf files are aligned 
> in what the USB device (URI) is called (usb28073):
>
> rpt.conf:
>
> [28073]                                                         ; 
> Change this to your assigned node number
>
> rxchannel = radio/usb28073                      ; Rx audio/signalling 
> channel
>
> usbradio.conf:
>
> [general]
>
> [usb28073]
>
> eeprom = 0              ; EEPROM installed: 0,1
>                         ; 0 = no (default)
>                         ; 1 = yes
>
>
> What am I missing???
>
>
> -Joe
>
> KA3NAM
>
>
>
>
>
>
>