[App_rpt-users] Assistance with TM-d710 and URI-x with DIAL

Michael J. Wolthuis wolthuis at gmail.com
Wed Sep 7 17:51:11 UTC 2016


Duplex=1 in rpt.conf

 

Half duplex with telemetry tones and hang time. Does not repeat audio. This mode is preferred when interfacing a simplex node.

 

Mike

 

 

From: Steve Zingman <szingman at msgstor.com>
Organization: MSGStor
Reply-To: <szingman at msgstor.com>
Date: Wednesday, September 7, 2016 at 1:48 PM
To: Michael Wolthuis <wolthuis at gmail.com>, "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Assistance with TM-d710 and URI-x with DIAL

 

What duplex mode are you set to in rpt.conf?

On 9/7/2016 9:53 AM, Michael J. Wolthuis wrote:

I am helping a friend with a new node.  He has a URI-X, Kenwood TM-d710 and DIAL.

 

TX audio is working fine.

RX audio is not.  I have the usbradio.conf file set with carrierfrom=usb

 

If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works.

 

So it seems it should be set for usb.

 

I tried DSP, didn’t seem to work either.

 

The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com

 

I am at a loss of what else to try, should I build the loopback tester that I see in the archives?

 

Mike

Kb8zgl

 




_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-- 
"Just say no to world domination"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160907/0a384b1f/attachment.html>


More information about the App_rpt-users mailing list