[App_rpt-users] Stupid asterisk tricks

[Stacy]

Should be:
1. Comment out the noload => chan_alsa.so or noload => chan_oss.so line 
in your modules conf.


On 09/14/2016 08:55 PM, Stacy wrote:
> All,
> For those of you who may want to play with the code I put up at 
> https://github.com/KG7QIN/AllStarLink-Asterisk-1.8 but don't have a 
> radio or anything else they want to /can spare at the moment, there is 
> something else you can do:
>
> Setup your console to dial.  Once you do this, you can do something 
> like "console dial 42088" and have the audio of your node play on your 
> computer speakers.  You could probably even use it to talk, but I 
> don't really recommend it unless you know what you are doing.
>
> To set this up, you will need to:
> 1. Add comment our the noload => chan_alsa.so or noload => chan_oss.so 
> line in your modules conf.
> 2. Edit your oss.conf or alsa.conf file (depending on which you use, I 
> recommend alsa) to use your console.
>
> I use alsa.conf, so here is what the my test node's alsa.conf looks like:
>
> [general]
> autoanswer=no
> context=radio-control-console
> ;this needs to correspond to your nodes's number
> extension=42088
> ;aplay -l can list your alsa devices
> input_device=plughw:0,1
> output_device=plughw:0,0
> ;default mute state
> mute=true
>
>
> For your extensions.conf, add this to the end of it so that 
> radio-control-console context has somewhere to go (change the 42088 to 
> match the node number you put in the extensions section in the file 
> above.
>
> [radio-control-console]
> exten => 42088,1,Ringing
> exten => 42088,n,Wait(3)
> exten => 42088,n,Answer
> exten => 42088,n,Set(CALLERID(name)="KG7XXX")
> exten => 42088,n,Playback(rpt/connected)
> exten => 42088,n,Playback(rpt/node)
> exten => 42088,n,Saydigits(${EXTEN})
> exten => 42088,n,Rpt(${EXTEN},P,${CALLERID(name)})
>
>
> You can then startup asterisk, and on the console type "console dial 
> <node>" and watch/listen as your system dials in using phone mode.  
> "console dial <digits>" to dial. "console hangup" to hangup.
>
> (Note I have only done this with the 1.8 port I've put up in the 
> github repository).
>
> -Stacy
> KG7QIN
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.