[App_rpt-users] Echolink and Teamspeak

[Loren Tedford]

Thanks Steve I forgot to mention the kernel headers situation.. You will
probably end up recompiling asterisk and DAHDI at least i had to on another
project i am working on..

Loren Tedford (KC9ZHV)
Phone:618-553-0806
Fax: 1-618-551-2755
Email: lorentedford at gmail.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net <http://ltcraft.net/>
http://voipham.com

On Thu, Sep 15, 2016 at 9:07 AM, Steve Zingman <szingman at msgstor.com> wrote:

> Be careful that if you do change the kernel, you can either install the
> kernel headers or know how to build them from source. You will need them
> for DAHDI.
>
> 73, Steve N4IRS
>
> On 9/15/2016 10:03 AM, Loren Tedford wrote:
>
> Warning the content listed below has not been tested..
>>
>> What i would do is install DIAL: then search online how to install a low
>> latency kernel a basic desktop of your choice (Just to make life easier)
>> and virtual audio cables for linux teamspeak has a linux installation as
>> well.. Their are several sip phone clients available out their on the
>> market and you could probably setup what ever needed to link into your
>> allstar node.. As far as machine speed and other info well I would at
>> least have 2 gigs of ram at minimum and recommend at least 4 gb of ram
>> if you really have to use a windows program in linux look at wine.. I
>> don't recommend this always try to find a linux alternative.. If your
>> wanting to run this computer off of 12 for power fail-over and other
>> needs check out a pico power supply..
>>
>> Best of luck I hope i have pointed you in the right direction this is
>> not to say you couldn't get this done with the pi but you might have
>> issues with locking open allstar and i guarantee you don't want that..
>>
>>
>> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai
> lman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160915/45bf5427/attachment.html>