[App_rpt-users] Echolink and Teamspeak

[Steve Zingman]

Be careful that if you do change the kernel, you can either install the 
kernel headers or know how to build them from source. You will need them 
for DAHDI.

73, Steve N4IRS

On 9/15/2016 10:03 AM, Loren Tedford wrote:

> Warning the content listed below has not been tested..
>
> What i would do is install DIAL: then search online how to install a low
> latency kernel a basic desktop of your choice (Just to make life easier)
> and virtual audio cables for linux teamspeak has a linux installation as
> well.. Their are several sip phone clients available out their on the
> market and you could probably setup what ever needed to link into your
> allstar node.. As far as machine speed and other info well I would at
> least have 2 gigs of ram at minimum and recommend at least 4 gb of ram
> if you really have to use a windows program in linux look at wine.. I
> don't recommend this always try to find a linux alternative.. If your
> wanting to run this computer off of 12 for power fail-over and other
> needs check out a pico power supply..
>
> Best of luck I hope i have pointed you in the right direction this is
> not to say you couldn't get this done with the pi but you might have
> issues with locking open allstar and i guarantee you don't want that..
>
>