[App_rpt-users] Receive audio not passing through URI

[mike at midnighteng.com]

I can't really tell the facts based on what you have stated but,
I'll give you a place to look anyway.

I'm guessing (perhaps incorrectly) you are interfacing this with a transceiver for
link ,  you may be in the wrong mode for a transceiver type link.
and/or full/half duplex issues.
OR
Try inverting the logic of your COR/COS and/or PTT line from the TRX.
But invert it electronically first.
Perhaps with a 3904/3906 transistor. Then adjust the software logic as needed.
It sounds like your audio is not gateing with the COR/PTT.

A place to start ?

But it always helps others helping you if you state the software you are using
(acid,dial, etc) and/or the the hardware (PC,BBB, Pi etc) and your node connection
configuration (simplex/duplex repeater, TRX link etc)
It helps everyone get a mental picture for what you are doing. and how you are
trying to do it and gets the attention of those doing like things.
Just a suggestion.

...mike/kb8jnm

> Update: I made some changes in the simpleusb.conf file and was able to
> get the keying problem solved. Still no audio being transmitted from
> the receiver. I hear myself talking in the monitor and with headphones
> on pin 21 but still transmitter keys but no audio.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
>
>
> On Mon, Sep 19, 2016 at 6:40 PM, Chris Viningre <chrisviningre at gmail.com> wrote:
>>  Greetings from a ham radio dummy. I'm old to ham radio but new to
>> setting up repeaters, Allstar and URI. Also lost working with Linux.
>> Yes pretty much a disaster looking for a place to happen. I have a
>> repeater running with a RC-100 controller on VHF. I'm attempting to
>> add a link to a linked system over Allstar. I have removed the old
>> controller and wired the URI. To the best of my knowledge I have the
>> wiring correct, but I could be wrong. I downloaded the Linux software
>> from the Allstarlink website and made a bootable disk. I loaded the
>> Debian with Asterisk software only, Not the Graphical version. At the
>> end of the install I manually added my information. I put my node
>> number and password number in. I followed the support information from
>> the Allstar site and did a node download from Allstar. I checked for
>> my node on the Allstar list and it is listed. I called the link phone
>> number and I can get through the login but it doesn't seem to connect
>> to my link. I get a busy signal and it hangs up. When I key a HT the
>> repeater sometimes comes up. Most of the time I have the key the PTT 2
>> or 3 times in a row to make it key up. Either way I get no audio out
>> of the transmitter other then the IDer and beep. I hear the receiver
>> just fine. I have search for help all over the internet, but what
>> information I find is like a Texan trying to read Arabic. I speak
>> Texagain so I'm not really the best with the English language. At
>> lease according to my wife.  Well I'm hoping maybe someone can help me
>> get this working or lead me in some kind of direction. Thank you.
>>
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.
>