[App_rpt-users] Receive audio not passing through URI

[Chris Viningre]

Steve your suggestion did the trick. I really appreciate everyone help
with this. Thank you.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre


On Tue, Sep 20, 2016 at 4:33 PM, Steve Zingman <szingman at msgstor.com> wrote:
> In your pictures you have txmixa set to no and txmixb set to voice.
> Notice the comment that txmixa is the left channel. set it to voice.
> Set txmix b to no.
>
> On 09/20/2016 06:10 PM, Chris Viningre wrote:
>>
>> I hope this works. I haven't learned how to copy a file and send it in
>> an email on the other computer. The transmitter audio is on pin 22
>> Left_Out.
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>>
>>
>> On Tue, Sep 20, 2016 at 12:50 PM, Steve Zingman <szingman at msgstor.com>
>> wrote:
>>>
>>> Chris,
>>> Could you please post your simpleusb.conf.
>>> Please tell us what pin on the URI you are using to feed the transmitter.
>>> Did you try setting transmitter level with simple-tune-menu?
>>>
>>> Steve
>>>
>>> On 9/20/2016 2:26 PM, Chris Viningre wrote:
>>>>
>>>> The software is Dail that I downloaded from Allstar. The radio is a GE
>>>> Mastur II VHF. The configuration was downloaded from the Allstar
>>>> portal. rpt.conf is set for duplex.
>>>>
>>>> Thanks Steve for turning me on to the simple-tune-menu.In there I
>>>> could see my squelch was opening and showing sound on the sound meter
>>>> and keying the transmitter. I removed the receiver output wire on pin
>>>> 21 (correct mic pin ?)and monitored through a headphone. I could hear
>>>> myself come through the receiver.
>>>> Chris Viningre
>>>> 70 W. Roadrunner
>>>> Salt Flat, Texas 79847
>>>> C:(915) 504-1510
>>>> chrisviningre at gmail.com
>>>> Amateur Radio Operator: WS5B
>>>> https://www.qrz.com/db/ws5b
>>>> http://www.reverbnation.com/chrisviningre
>>>>
>>>>
>>>> On Tue, Sep 20, 2016 at 4:24 AM, Steve Zingman <szingman at msgstor.com>
>>>> wrote:
>>>>>
>>>>> Chris,
>>>>> Are set to duplex in rpt.conf? simpleusb-tune-menu is a good program to
>>>>> test
>>>>> your configuration.
>>>>>
>>>>> 73, Steve N4IRS
>>>>>
>>>>> On 09/20/2016 04:01 AM, Chris Viningre wrote:
>>>>>>
>>>>>>
>>>>>> Update: I made some changes in the simpleusb.conf file and was able to
>>>>>> get the keying problem solved. Still no audio being transmitted from
>>>>>> the receiver. I hear myself talking in the monitor and with headphones
>>>>>> on pin 21 but still transmitter keys but no audio.
>>>>>> Chris Viningre
>>>>>> 70 W. Roadrunner
>>>>>> Salt Flat, Texas 79847
>>>>>> C:(915) 504-1510
>>>>>> chrisviningre at gmail.com
>>>>>> Amateur Radio Operator: WS5B
>>>>>> https://www.qrz.com/db/ws5b
>>>>>> http://www.reverbnation.com/chrisviningre
>>>>>>
>>>>>>
>>>>>> On Mon, Sep 19, 2016 at 6:40 PM, Chris Viningre
>>>>>> <chrisviningre at gmail.com>
>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>    Greetings from a ham radio dummy. I'm old to ham radio but new to
>>>>>>> setting up repeaters, Allstar and URI. Also lost working with Linux.
>>>>>>> Yes pretty much a disaster looking for a place to happen. I have a
>>>>>>> repeater running with a RC-100 controller on VHF. I'm attempting to
>>>>>>> add a link to a linked system over Allstar. I have removed the old
>>>>>>> controller and wired the URI. To the best of my knowledge I have the
>>>>>>> wiring correct, but I could be wrong. I downloaded the Linux software
>>>>>>> from the Allstarlink website and made a bootable disk. I loaded the
>>>>>>> Debian with Asterisk software only, Not the Graphical version. At the
>>>>>>> end of the install I manually added my information. I put my node
>>>>>>> number and password number in. I followed the support information
>>>>>>> from
>>>>>>> the Allstar site and did a node download from Allstar. I checked for
>>>>>>> my node on the Allstar list and it is listed. I called the link phone
>>>>>>> number and I can get through the login but it doesn't seem to connect
>>>>>>> to my link. I get a busy signal and it hangs up. When I key a HT the
>>>>>>> repeater sometimes comes up. Most of the time I have the key the PTT
>>>>>>> 2
>>>>>>> or 3 times in a row to make it key up. Either way I get no audio out
>>>>>>> of the transmitter other then the IDer and beep. I hear the receiver
>>>>>>> just fine. I have search for help all over the internet, but what
>>>>>>> information I find is like a Texan trying to read Arabic. I speak
>>>>>>> Texagain so I'm not really the best with the English language. At
>>>>>>> lease according to my wife.  Well I'm hoping maybe someone can help
>>>>>>> me
>>>>>>> get this working or lead me in some kind of direction. Thank you.
>>>>>>>
>>>>>>> Chris Viningre
>>>>>>> 70 W. Roadrunner
>>>>>>> Salt Flat, Texas 79847
>>>>>>> C:(915) 504-1510
>>>>>>> chrisviningre at gmail.com
>>>>>>> Amateur Radio Operator: WS5B
>>>>>>> https://www.qrz.com/db/ws5b
>>>>>>> http://www.reverbnation.com/chrisviningre
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>>>>> down to
>>>>>> the bottom of the page. Enter your email address and press the
>>>>>> "Unsubscribe
>>>>>> or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>> confirmation. If you have trouble unsubscribing, please send a message
>>>>>> to
>>>>>> the list detailing the problem.
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> "Anything is possible if you don't know what you are talking about."
>>>>> 1st Law of Logic
>>>>>
>>> --
>>> "Just say no to world domination"
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>