[App_rpt-users] Receive audio not passing through URI

[Chris Viningre]

The software is Dail that I downloaded from Allstar. The radio is a GE
Mastur II VHF. The configuration was downloaded from the Allstar
portal. rpt.conf is set for duplex.

Thanks Steve for turning me on to the simple-tune-menu.In there I
could see my squelch was opening and showing sound on the sound meter
and keying the transmitter. I removed the receiver output wire on pin
21 (correct mic pin ?)and monitored through a headphone. I could hear
myself come through the receiver.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre


On Tue, Sep 20, 2016 at 4:24 AM, Steve Zingman <szingman at msgstor.com> wrote:
> Chris,
> Are set to duplex in rpt.conf? simpleusb-tune-menu is a good program to test
> your configuration.
>
> 73, Steve N4IRS
>
> On 09/20/2016 04:01 AM, Chris Viningre wrote:
>>
>> Update: I made some changes in the simpleusb.conf file and was able to
>> get the keying problem solved. Still no audio being transmitted from
>> the receiver. I hear myself talking in the monitor and with headphones
>> on pin 21 but still transmitter keys but no audio.
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>>
>>
>> On Mon, Sep 19, 2016 at 6:40 PM, Chris Viningre <chrisviningre at gmail.com>
>> wrote:
>>>
>>>   Greetings from a ham radio dummy. I'm old to ham radio but new to
>>> setting up repeaters, Allstar and URI. Also lost working with Linux.
>>> Yes pretty much a disaster looking for a place to happen. I have a
>>> repeater running with a RC-100 controller on VHF. I'm attempting to
>>> add a link to a linked system over Allstar. I have removed the old
>>> controller and wired the URI. To the best of my knowledge I have the
>>> wiring correct, but I could be wrong. I downloaded the Linux software
>>> from the Allstarlink website and made a bootable disk. I loaded the
>>> Debian with Asterisk software only, Not the Graphical version. At the
>>> end of the install I manually added my information. I put my node
>>> number and password number in. I followed the support information from
>>> the Allstar site and did a node download from Allstar. I checked for
>>> my node on the Allstar list and it is listed. I called the link phone
>>> number and I can get through the login but it doesn't seem to connect
>>> to my link. I get a busy signal and it hangs up. When I key a HT the
>>> repeater sometimes comes up. Most of the time I have the key the PTT 2
>>> or 3 times in a row to make it key up. Either way I get no audio out
>>> of the transmitter other then the IDer and beep. I hear the receiver
>>> just fine. I have search for help all over the internet, but what
>>> information I find is like a Texan trying to read Arabic. I speak
>>> Texagain so I'm not really the best with the English language. At
>>> lease according to my wife.  Well I'm hoping maybe someone can help me
>>> get this working or lead me in some kind of direction. Thank you.
>>>
>>> Chris Viningre
>>> 70 W. Roadrunner
>>> Salt Flat, Texas 79847
>>> C:(915) 504-1510
>>> chrisviningre at gmail.com
>>> Amateur Radio Operator: WS5B
>>> https://www.qrz.com/db/ws5b
>>> http://www.reverbnation.com/chrisviningre
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> the bottom of the page. Enter your email address and press the "Unsubscribe
>> or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>