[App_rpt-users] Receive audio not passing through URI

[Steve Zingman]

Chris,
Could you please post your simpleusb.conf.
Please tell us what pin on the URI you are using to feed the transmitter.
Did you try setting transmitter level with simple-tune-menu?

Steve

On 9/20/2016 2:26 PM, Chris Viningre wrote:
> The software is Dail that I downloaded from Allstar. The radio is a GE
> Mastur II VHF. The configuration was downloaded from the Allstar
> portal. rpt.conf is set for duplex.
>
> Thanks Steve for turning me on to the simple-tune-menu.In there I
> could see my squelch was opening and showing sound on the sound meter
> and keying the transmitter. I removed the receiver output wire on pin
> 21 (correct mic pin ?)and monitored through a headphone. I could hear
> myself come through the receiver.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
>
>
> On Tue, Sep 20, 2016 at 4:24 AM, Steve Zingman <szingman at msgstor.com> wrote:
>> Chris,
>> Are set to duplex in rpt.conf? simpleusb-tune-menu is a good program to test
>> your configuration.
>>
>> 73, Steve N4IRS
>>
>> On 09/20/2016 04:01 AM, Chris Viningre wrote:
>>>
>>> Update: I made some changes in the simpleusb.conf file and was able to
>>> get the keying problem solved. Still no audio being transmitted from
>>> the receiver. I hear myself talking in the monitor and with headphones
>>> on pin 21 but still transmitter keys but no audio.
>>> Chris Viningre
>>> 70 W. Roadrunner
>>> Salt Flat, Texas 79847
>>> C:(915) 504-1510
>>> chrisviningre at gmail.com
>>> Amateur Radio Operator: WS5B
>>> https://www.qrz.com/db/ws5b
>>> http://www.reverbnation.com/chrisviningre
>>>
>>>
>>> On Mon, Sep 19, 2016 at 6:40 PM, Chris Viningre <chrisviningre at gmail.com>
>>> wrote:
>>>>
>>>>   Greetings from a ham radio dummy. I'm old to ham radio but new to
>>>> setting up repeaters, Allstar and URI. Also lost working with Linux.
>>>> Yes pretty much a disaster looking for a place to happen. I have a
>>>> repeater running with a RC-100 controller on VHF. I'm attempting to
>>>> add a link to a linked system over Allstar. I have removed the old
>>>> controller and wired the URI. To the best of my knowledge I have the
>>>> wiring correct, but I could be wrong. I downloaded the Linux software
>>>> from the Allstarlink website and made a bootable disk. I loaded the
>>>> Debian with Asterisk software only, Not the Graphical version. At the
>>>> end of the install I manually added my information. I put my node
>>>> number and password number in. I followed the support information from
>>>> the Allstar site and did a node download from Allstar. I checked for
>>>> my node on the Allstar list and it is listed. I called the link phone
>>>> number and I can get through the login but it doesn't seem to connect
>>>> to my link. I get a busy signal and it hangs up. When I key a HT the
>>>> repeater sometimes comes up. Most of the time I have the key the PTT 2
>>>> or 3 times in a row to make it key up. Either way I get no audio out
>>>> of the transmitter other then the IDer and beep. I hear the receiver
>>>> just fine. I have search for help all over the internet, but what
>>>> information I find is like a Texan trying to read Arabic. I speak
>>>> Texagain so I'm not really the best with the English language. At
>>>> lease according to my wife.  Well I'm hoping maybe someone can help me
>>>> get this working or lead me in some kind of direction. Thank you.
>>>>
>>>> Chris Viningre
>>>> 70 W. Roadrunner
>>>> Salt Flat, Texas 79847
>>>> C:(915) 504-1510
>>>> chrisviningre at gmail.com
>>>> Amateur Radio Operator: WS5B
>>>> https://www.qrz.com/db/ws5b
>>>> http://www.reverbnation.com/chrisviningre
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>>> the bottom of the page. Enter your email address and press the "Unsubscribe
>>> or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>

-- 
"Just say no to world domination"