[App_rpt-users] New server not starting asterisk relabily
C B
harvard5362 at yahoo.com
Sat Sep 24 13:33:06 UTC 2016
Hi
tried rebuilding onto a newer HP6200 I3.
similar issue when using a specific 4 ( on the back the 4 ports that are vertically in line) of the 10 available USB ports, however an additional message is displayed on the local terminal
"usb 1-1.1 cannot submit urb 0, error -28 not enough bandwidth"
If i don't use any of those 4 ports all seems OK. (utilizing the 2 in the back that are under the Ethernet jack and 2 of the 4 in the front)
The specifications for the DC6200 say that all ports are USB 2.0 and do not indicate any difference.
I am worried that if this is a hardware failure that it could fail in service, if it is a software issue i would like to resolve it.
if it is normal then i can use this server.
Any help appreciated.
Chris
From: C B <harvard5362 at yahoo.com>
To: "szingman at msgstor.com" <szingman at msgstor.com>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Sent: Thursday, September 22, 2016 9:58 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily
Thank you for your responce
here is the output you requested
Chris
root at N6LXX-BLUE:~# asterisk -vvvcdAsterisk 1537, Copyright (C) 1999 - 2008 Digium, Inc. and others.Created by Mark Spencer <markster at digium.com>Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.This is free software, with components licensed under the GNU General PublicLicense version 2 and other licenses; you are welcome to redistribute it undercertain conditions. Type 'core show license' for details.=========================================================================Parsing /etc/asterisk/asterisk.confParsing /etc/asterisk/logger.confAsterisk Event Logger Started /var/log/asterisk/event_logAsterisk Dynamic Loader Starting:[Sep 22 09:52:16] NOTICE[707]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds. == Manager registered action Ping == Manager registered action Events == Manager registered action Logoff == Manager registered action Hangup == Manager registered action Status == Manager registered action Setvar == Manager registered action Getvar == Manager registered action GetConfig == Manager registered action UpdateConfig == Manager registered action Redirect == Manager registered action Originate == Manager registered action Command == Manager registered action ExtensionState == Manager registered action AbsoluteTimeout == Manager registered action MailboxStatus == Manager registered action MailboxCount == Manager registered action ListCommands == Manager registered action UserEvent == Manager registered action WaitEventAsterisk Management interface listening on port XXXXX[Sep 22 09:52:16] NOTICE[707]: cdr.c:1416 do_reload: CDR simple logging enabled. == RTP Allocating from port range 5000 -> 31000 == UDPTL allocating from port range 4500 -> 4999Asterisk PBX Core InitializingRegistering builtin applications: [Answer] == Registered application 'Answer' [BackGround] == Registered application 'BackGround' [Busy] == Registered application 'Busy' [Congestion] == Registered application 'Congestion' [Goto] == Registered application 'Goto' [GotoIf] == Registered application 'GotoIf' [GotoIfTime] == Registered application 'GotoIfTime' [ExecIfTime] == Registered application 'ExecIfTime' [Hangup] == Registered application 'Hangup' [NoOp] == Registered application 'NoOp' [Progress] == Registered application 'Progress' [ResetCDR] == Registered application 'ResetCDR' [Ringing] == Registered application 'Ringing' [SayNumber] == Registered application 'SayNumber' [SayDigits] == Registered application 'SayDigits' [SayAlpha] == Registered application 'SayAlpha' [SayPhonetic] == Registered application 'SayPhonetic' [SetAMAFlags] == Registered application 'SetAMAFlags' [SetGlobalVar] == Registered application 'SetGlobalVar' [Set] == Registered application 'Set' [ImportVar] == Registered application 'ImportVar' [Wait] == Registered application 'Wait' [WaitExten] == Registered application 'WaitExten' == Manager registered action DBGet == Manager registered action DBPutAsterisk Dynamic Loader Starting:[Sep 22 09:52:16] NOTICE[707]: loader.c:874 load_modules: 53 modules will be loaded.res_adsi.so => (ADSI Resource) -- Loaded PUBLIC key 'iaxtel' -- Loaded PUBLIC key 'freeworlddialup' -- Loaded PUBLIC key 'allstar'res_crypto.so => (Cryptographic Digital Signatures) -- Registered extension context 'parkedcalls' -- Added extension '700' priority 1 to parkedcalls == Registered application 'ParkedCall' == Registered application 'Park' == Manager registered action ParkedCalls == Manager registered action Parkres_features.so => (Call Features Resource) -- Registered indication country 'us' -- Registered indication country 'au' -- Registered indication country 'fr' -- Registered indication country 'de' -- Registered indication country 'nl' -- Registered indication country 'uk' -- Registered indication country 'fi' -- Registered indication country 'no' -- Setting default indication country to 'us' == Registered application 'PlayTones' == Registered application 'StopPlayTones'res_indications.so => (Indications Resource) == Registered application 'Authenticate'app_authenticate.so => (Authentication Application) == Registered application 'Dial' == Registered application 'RetryDial'app_dial.so => (Dialing Application) == Registered application 'Exec' == Registered application 'TryExec' == Registered application 'ExecIf'app_exec.so => (Executes dialplan applications) == Registered application 'MacroExit' == Registered application 'MacroIf' == Registered application 'MacroExclusive' == Registered application 'Macro'app_macro.so => (Extension Macros) == Registered application 'Playback'app_playback.so => (Sound File Playback Application) == Manager registered action RptLocalNodes == Manager registered action RptStatus == Registered application 'Rpt'app_rpt.so => (Radio Repeater/Remote Base Application) == Registered application 'TrySystem' == Registered application 'System'app_system.so => (Generic System() application) == Registered application 'Transfer'app_transfer.so => (Transfer) == Registered application 'DAHDISendKeypadFacility' == Registered application 'ZapSendKeypadFacility' -- Automatically generated pseudo channel == Registered channel type 'DAHDI' (DAHDI Telephony Driver w/PRI) == Manager registered action DAHDITransfer == Manager registered action ZapTransfer == Manager registered action DAHDIHangup == Manager registered action ZapHangup == Manager registered action DAHDIDialOffHook == Manager registered action ZapDialOffHook == Manager registered action DAHDIDNDon == Manager registered action ZapDNDon == Manager registered action DAHDIDNDoff == Manager registered action ZapDNDoff == Manager registered action DAHDIShowChannels == Manager registered action ZapShowChannels == Manager registered action DAHDIRestart == Manager registered action ZapRestartchan_dahdi.so => (DAHDI Telephony) == Refreshing DNS lookups. == Registered custom function IAXPEER == Registered application 'IAX2Provision' == Manager registered action IAXpeers == Manager registered action IAXnetstats == Using TOS bits 30 == Binding IAX2 to '0.0.0.0:4569' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org' == adding dns manager for 'register.allstarlink.org'[Sep 22 09:52:16] WARNING[707]: acl.c:345 ast_append_ha: is not a valid IP == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2)) == 10 helper threads started == IAX Ready and Listening == Loaded firmware 'iaxy.bin'chan_iax2.so => (Inter Asterisk eXchange (Ver 2)) == Registered channel type 'Local' (Local Proxy Channel Driver)chan_local.so => (Local Proxy Channel (Note: used internally by other modules)) -- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting
-- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting
-- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting
-- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting
== Registered channel type 'SimpleUSB' (Simple USB (CM108) Radio Channel Driver)chan_simpleusb.so => (simple usb Radio Interface Channel Driver) == Registered translator 'adpcmtolin' from format adpcm to slin, cost 1 == Registered translator 'lintoadpcm' from format slin to adpcm, cost 1codec_adpcm.so => (Adaptive Differential PCM Coder/Decoder) == Registered translator 'alawtolin' from format alaw to slin, cost 1 == Registered translator 'lintoalaw' from format slin to alaw, cost 1codec_alaw.so => (A-law Coder/Decoder) == Registered translator 'alawtoulaw' from format alaw to ulaw, cost 1 == Registered translator 'ulawtoalaw' from format ulaw to alaw, cost 1codec_a_mu.so => (A-law and Mulaw direct Coder/Decoder) == Registered translator 'g726tolin' from format g726 to slin, cost 1 == Registered translator 'lintog726' from format slin to g726, cost 1 == Registered translator 'g726aal2tolin' from format g726aal2 to slin, cost 1 == Registered translator 'lintog726aal2' from format slin to g726aal2, cost 1 == Registered translator 'g726aal2tog726' from format g726aal2 to g726, cost 1 == Registered translator 'g726tog726aal2' from format g726 to g726aal2, cost 1codec_g726.so => (ITU G.726-32kbps G726 Transcoder) == Registered translator 'gsmtolin' from format gsm to slin, cost 1 == Registered translator 'lintogsm' from format slin to gsm, cost 1codec_gsm.so => (GSM Coder/Decoder) == Registered translator 'ulawtolin' from format ulaw to slin, cost 1 == Registered translator 'lintoulaw' from format slin to ulaw, cost 1codec_ulaw.so => (mu-Law Coder/Decoder) == Registered file format g723sf, extension(s) g723|g723sfformat_g723.so => (G.723.1 Simple Timestamp File Format) == Registered file format g726-40, extension(s) g726-40 == Registered file format g726-32, extension(s) g726-32 == Registered file format g726-24, extension(s) g726-24 == Registered file format g726-16, extension(s) g726-16format_g726.so => (Raw G.726 (16/24/32/40kbps) data) == Registered file format g729, extension(s) g729format_g729.so => (Raw G729 data) == Registered file format gsm, extension(s) gsmformat_gsm.so => (Raw GSM data) == Registered file format h263, extension(s) h263format_h263.so => (Raw H.263 data) == Registered file format h264, extension(s) h264format_h264.so => (Raw H.264 data) == Registered file format iLBC, extension(s) ilbcformat_ilbc.so => (Raw iLBC data) == Registered file format pcm, extension(s) pcm|ulaw|ul|mu == Registered file format alaw, extension(s) alaw|al == Registered file format au, extension(s) au == Registered file format g722, extension(s) g722format_pcm.so => (Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz) == Registered file format sln, extension(s) sln|rawformat_sln.so => (Raw Signed Linear Audio support (SLN)) == Registered file format vox, extension(s) voxformat_vox.so => (Dialogic VOX (ADPCM) File Format) == Registered file format wav49, extension(s) WAV|wav49format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM)) == Registered file format wav, extension(s) wavformat_wav.so => (Microsoft WAV format (8000Hz Signed Linear)) == Registered custom function BASE64_ENCODE == Registered custom function BASE64_DECODEfunc_base64.so => (base64 encode/decode dialplan functions) == Registered custom function CALLERIDfunc_callerid.so => (Caller ID related dialplan function) == Registered custom function CDRfunc_cdr.so => (CDR dialplan function) == Registered custom function CHANNELfunc_channel.so => (Channel information dialplan function) == Registered custom function CURLfunc_curl.so => (Load external URL) == Registered custom function CUT == Registered custom function SORTfunc_cut.so => (Cut out information from a string) == Registered custom function DB == Registered custom function DB_EXISTS == Registered custom function DB_DELETEfunc_db.so => (Database (astdb) related dialplan functions) == Registered custom function ENUMLOOKUP == Registered custom function TXTCIDNAMEfunc_enum.so => (ENUM related dialplan functions) == Registered custom function ENV == Registered custom function STATfunc_env.so => (Environment/filesystem dialplan functions) == Registered custom function GLOBALfunc_global.so => (Global variable dialplan functions) == Registered custom function GROUP_COUNT == Registered custom function GROUP_MATCH_COUNT == Registered custom function GROUP_LIST == Registered custom function GROUPfunc_groupcount.so => (Channel group dialplan functions) == Registered custom function LANGUAGEfunc_language.so => (Channel language dialplan function) == Registered custom function ISNULL == Registered custom function SET == Registered custom function EXISTS == Registered custom function IF == Registered custom function IFTIMEfunc_logic.so => (Logical dialplan functions) == Registered custom function MATHfunc_math.so => (Mathematical dialplan function) == Registered custom function MD5 == Registered custom function CHECK_MD5func_md5.so => (MD5 digest dialplan functions) == Registered custom function MUSICCLASSfunc_moh.so => (Music-on-hold dialplan function) == Registered custom function RANDfunc_rand.so => (Random number dialplan function) == Registered custom function REALTIMEfunc_realtime.so => (Read/Write values from a RealTime repository) == Setting global variable 'HOMENPA' to '200' -- Registered extension context 'default' -- Added extension 'i' priority 1 to default -- Registered extension context 'radio-secure' -- Added extension '43824' priority 1 to radio-secure -- Added extension '43827' priority 1 to radio-secure -- Added extension '43825' priority 1 to radio-secure -- Added extension '43826' priority 1 to radio-secure -- Registered extension context 'radio-secure-proxy' -- Added extension '43824' priority 1 to radio-secure-proxy -- Added extension '43827' priority 1 to radio-secure-proxy -- Added extension '43825' priority 1 to radio-secure-proxy -- Added extension '43826' priority 1 to radio-secure-proxy -- Added extension '_0X.' priority 1 to radio-secure-proxy -- Registered extension context 'pstn-out' -- Added extension '_NXXNXXXXXX' priority 1 to pstn-out -- Added extension '_NXXNXXXXXX' priority 2 to pstn-out -- Registered extension context 'invalidnum' -- Added extension 's' priority 1 to invalidnum -- Added extension 's' priority 2 to invalidnum -- Added extension 's' priority 3 to invalidnum -- Added extension 's' priority 4 to invalidnum -- Registered extension context 'radio' -- Added extension '_X11' priority 1 to radio -- Added extension '_NXXXXXX' priority 1 to radio -- Added extension '_1XXXXXXXXXX' priority 1 to radio -- Added extension '_07XX' priority 1 to radio -- Added extension '00' priority 1 to radio -- Registered extension context 'check_route' -- Added extension '_1800NXXXXXX' priority 2 to check_route -- Added extension '_1888NXXXXXX' priority 2 to check_route -- Added extension '_1877NXXXXXX' priority 2 to check_route -- Added extension '_1866NXXXXXX' priority 2 to check_route -- Added extension '_1855NXXXXXX' priority 2 to check_route -- Added extension '_1X00XXXXXXX' priority 2 to check_route -- Added extension '_1X11XXXXXXX' priority 2 to check_route -- Added extension '_X11' priority 2 to check_route -- Added extension '_1NXX555XXXX' priority 2 to check_route -- Added extension '_1NXX976XXXX' priority 2 to check_route -- Added extension '_1809XXXXXXX' priority 2 to check_route -- Added extension '_1900XXXXXXX' priority 2 to check_route -- Added extension '_1NXXXXXXXXX' priority 1 to check_route -- Added extension '_X.' priority 2 to check_route -- Registered extension context 'my-ip' -- Added extension 's' priority 1 to my-ip -- Added extension 's' priority 2 to my-ip -- Added extension 's' priority 3 to my-ip -- Added extension 's' priority 4 to my-ip -- Registered extension context 'allstar-sys' -- Added extension '0' priority 1 to allstar-sys -- Added extension '0' priority 2 to allstar-sys -- Added extension '0' priority 3 to allstar-sys -- Added extension '_0.' priority 1 to allstar-sys -- Added extension '_0.' priority 2 to allstar-sys -- Added extension '_0.' priority 3 to allstar-sys -- Added extension '_1.' priority 1 to allstar-sys -- Added extension '_1.' priority 2 to allstar-sys -- Added extension '_2.' priority 1 to allstar-sys -- Added extension '_2.' priority 2 to allstar-sys -- Added extension '_2.' priority 3 to allstar-sys -- Added extension '_2.' priority 4 to allstar-sys -- Added extension '_2.' priority 5 to allstar-sys -- Added extension '_2.' priority 6 to allstar-sys -- Added extension '_2.' priority 7 to allstar-sys -- Added extension '_3.' priority 1 to allstar-sys -- Added extension '_3.' priority 2 to allstar-sys -- Added extension '_3.' priority 3 to allstar-sys -- Added extension '_3.' priority 4 to allstar-sys -- Added extension '_3.' priority 5 to allstar-sys -- Added extension '_3.' priority 6 to allstar-sys -- Added extension '_3.' priority 7 to allstar-sys -- Added extension '_4.' priority 1 to allstar-sys -- Added extension '_4.' priority 2 to allstar-sys -- Added extension '_4.' priority 3 to allstar-sys -- Added extension '_4.' priority 4 to allstar-sys -- Added extension '_4.' priority 5 to allstar-sys -- Added extension '_4.' priority 6 to allstar-sys -- Added extension '_4.' priority 7 to allstar-sys -- Added extension '_5.' priority 1 to allstar-sys -- Added extension '_5.' priority 2 to allstar-sys -- Added extension '_5.' priority 3 to allstar-sys -- Added extension '_5.' priority 4 to allstar-sys -- Added extension '_5.' priority 5 to allstar-sys -- Added extension '_5.' priority 6 to allstar-sys -- Added extension '_5.' priority 7 to allstar-sys -- Registered extension context 'allstar-public' -- Added extension 's' priority 1 to allstar-public -- Added extension 's' priority 2 to allstar-public -- Added extension 's' priority 3 to allstar-public -- Added extension 's' priority 4 to allstar-public -- Added extension 's' priority 5 to allstar-public -- Added extension 's' priority 6 to allstar-public -- Added extension 's' priority 7 to allstar-public -- Added extension 's' priority 8 to allstar-public -- Added extension 's' priority 9 to allstar-public -- Added extension 's' priority 10 to allstar-public -- Added extension 's' priority 11 to allstar-public -- Added extension 's' priority 12 to allstar-public -- Added extension 's' priority 13 to allstar-public -- Added extension 's' priority 14 to allstar-public -- Added extension 's' priority 15 to allstar-public -- Added extension 's' priority 16 to allstar-public -- Added extension 's' priority 17 to allstar-public -- Added extension '9999' priority 1 to allstar-publicpbx_config.so => (Text Extension Configuration)Asterisk Ready.*CLI> -- Loading initial config for repeater 43824[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init 43824 -- Loading initial config for repeater 43827 -- Re-Loading config for repeater 43824[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init 43827 -- Loading initial config for repeater 43825 -- rpt (Rx) initiating call to Simpleusb/usb43824 on SimpleUSB/usb43824 -- Re-Loading config for repeater 43827[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init 43825 -- Loading initial config for repeater 43826 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init 43826 -- Re-Loading config for repeater 43826 -- Re-Loading config for repeater 43825 -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826 -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825[Sep 22 09:52:19] NOTICE[734]: chan_simpleusb.c:1522 hidthread: Assigned USB device 4-2:1.0 to simpleusb channel usb43824 == Set device 4-2:1.0 to usb43824[Sep 22 09:52:19] WARNING[734]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43824.conf for device usb43824 .[Sep 22 09:52:21] NOTICE[736]: chan_simpleusb.c:1522 hidthread: Assigned USB device 4-1:1.0 to simpleusb channel usb43827 == Set device 4-1:1.0 to usb43827[Sep 22 09:52:22] WARNING[736]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:22] ERROR[733]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1667634044' -- Hungup 'DAHDI/pseudo-705984013' -- Hungup 'DAHDI/pseudo-1881123794' -- Hungup 'DAHDI/pseudo-653099833' -- Hungup 'DAHDI/pseudo-476996173' -- Hungup 'DAHDI/pseudo-2004592085' -- Re-Loading config for repeater 43827[Sep 22 09:52:23] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827 == Set device 1-2:1.0 to usb43826[Sep 22 09:52:24] WARNING[738]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:24] ERROR[737]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1351605847' -- Hungup 'DAHDI/pseudo-307049283' -- Hungup 'DAHDI/pseudo-688419805' -- Hungup 'DAHDI/pseudo-562236946' -- Hungup 'DAHDI/pseudo-1246242116' -- Hungup 'DAHDI/pseudo-39509928' -- Re-Loading config for repeater 43826[Sep 22 09:52:25] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826 -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826 == Manager 'admin' logged on from 71.95.13.254 == Set device 1-1:1.0 to usb43825[Sep 22 09:52:26] WARNING[739]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:26] ERROR[735]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1677253818' -- Hungup 'DAHDI/pseudo-1372542267' -- Hungup 'DAHDI/pseudo-223654489' -- Hungup 'DAHDI/pseudo-1373593525' -- Hungup 'DAHDI/pseudo-772618664' -- Hungup 'DAHDI/pseudo-971160304'[Sep 22 09:52:27] ERROR[750]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-554310435' -- Hungup 'DAHDI/pseudo-1833530818' -- Hungup 'DAHDI/pseudo-2076008742' -- Hungup 'DAHDI/pseudo-463789068' -- Hungup 'DAHDI/pseudo-603830892' -- Hungup 'DAHDI/pseudo-1269505489'[Sep 22 09:52:27] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825 -- Re-Loading config for repeater 43825 -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825 == Set device 4-1:1.0 to usb43827[Sep 22 09:52:27] WARNING[751]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:29] ERROR[752]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1817601571' -- Hungup 'DAHDI/pseudo-506184524' -- Hungup 'DAHDI/pseudo-5686270' -- Hungup 'DAHDI/pseudo-630381541' -- Hungup 'DAHDI/pseudo-2014513745' -- Hungup 'DAHDI/pseudo-1166368152'[Sep 22 09:52:29] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827 -- Re-Loading config for repeater 43827 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827[Sep 22 09:52:29] WARNING[757]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827][Sep 22 09:52:29] WARNING[757]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all. == Set device 1-2:1.0 to usb43826[Sep 22 09:52:29] WARNING[753]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:31] ERROR[755]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-278507476' -- Hungup 'DAHDI/pseudo-1292553899' -- Hungup 'DAHDI/pseudo-405854212' -- Hungup 'DAHDI/pseudo-402938764' -- Hungup 'DAHDI/pseudo-2016767570' -- Hungup 'DAHDI/pseudo-718214827' -- Re-Loading config for repeater 43826[Sep 22 09:52:31] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826 -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826[Sep 22 09:52:31] WARNING[759]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826][Sep 22 09:52:31] WARNING[759]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all. == Set device 1-1:1.0 to usb43825[Sep 22 09:52:32] WARNING[756]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:33] ERROR[757]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1902143774' -- Hungup 'DAHDI/pseudo-187405755' -- Hungup 'DAHDI/pseudo-1777965740' -- Hungup 'DAHDI/pseudo-777214063' -- Hungup 'DAHDI/pseudo-1206356314' -- Hungup 'DAHDI/pseudo-54466694' -- Re-Loading config for repeater 43825[Sep 22 09:52:33] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825 -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825[Sep 22 09:52:33] WARNING[761]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825][Sep 22 09:52:33] WARNING[761]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all. == Set device 4-1:1.0 to usb43827[Sep 22 09:52:34] WARNING[758]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:35] ERROR[759]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-192861649' -- Hungup 'DAHDI/pseudo-1853644394' -- Hungup 'DAHDI/pseudo-2136391093' -- Hungup 'DAHDI/pseudo-985109626' -- Hungup 'DAHDI/pseudo-819893627' -- Hungup 'DAHDI/pseudo-2006255112' -- Re-Loading config for repeater 43827[Sep 22 09:52:35] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827[Sep 22 09:52:35] WARNING[763]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827][Sep 22 09:52:35] WARNING[763]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all. == Set device 1-2:1.0 to usb43826[Sep 22 09:52:36] WARNING[760]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:37] ERROR[761]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-70661778' -- Hungup 'DAHDI/pseudo-378161311' -- Hungup 'DAHDI/pseudo-1147306302' -- Hungup 'DAHDI/pseudo-823777928' -- Hungup 'DAHDI/pseudo-1289003945' -- Hungup 'DAHDI/pseudo-1090121855'[Sep 22 09:52:37] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826 -- Re-Loading config for repeater 43826 -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826[Sep 22 09:52:37] WARNING[765]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826][Sep 22 09:52:37] WARNING[765]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all. == Set device 1-1:1.0 to usb43825[Sep 22 09:52:37] WARNING[762]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:39] ERROR[763]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-118898930' -- Hungup 'DAHDI/pseudo-1965068293' -- Hungup 'DAHDI/pseudo-1894346266' -- Hungup 'DAHDI/pseudo-604720300' -- Hungup 'DAHDI/pseudo-624798991' -- Hungup 'DAHDI/pseudo-893661220' -- Re-Loading config for repeater 43825[Sep 22 09:52:39] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825 -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825[Sep 22 09:52:39] WARNING[767]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825][Sep 22 09:52:39] WARNING[767]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all. == Set device 4-1:1.0 to usb43827[Sep 22 09:52:40] WARNING[764]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 . == Manager 'admin' logged on from 71.95.13.254[Sep 22 09:52:41] ERROR[765]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-711702460' -- Hungup 'DAHDI/pseudo-1081947274' -- Hungup 'DAHDI/pseudo-602097671' -- Hungup 'DAHDI/pseudo-459206108' -- Hungup 'DAHDI/pseudo-1165190121' -- Hungup 'DAHDI/pseudo-1201172760' -- Re-Loading config for repeater 43827[Sep 22 09:52:41] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827[Sep 22 09:52:41] WARNING[770]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827][Sep 22 09:52:41] WARNING[770]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all. == Set device 1-2:1.0 to usb43826[Sep 22 09:52:42] WARNING[766]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:43] ERROR[767]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-898830267' -- Hungup 'DAHDI/pseudo-2028926274' -- Hungup 'DAHDI/pseudo-1233048473' -- Hungup 'DAHDI/pseudo-1272558401' -- Hungup 'DAHDI/pseudo-1579607684' -- Hungup 'DAHDI/pseudo-1551930100' == Set device 1-1:1.0 to usb43825[Sep 22 09:52:43] WARNING[768]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:43] NOTICE[713]: app_rpt.c:22038 rpt_master: RPT thread restarted on 43825[Sep 22 09:52:43] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825[Sep 22 09:52:43] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826 -- Re-Loading config for repeater 43826 -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826[Sep 22 09:52:43] WARNING[773]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826] -- Re-Loading config for repeater 43825 -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825[Sep 22 09:52:43] WARNING[772]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825][Sep 22 09:52:43] WARNING[773]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.[Sep 22 09:52:43] WARNING[772]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all. == Set device 4-1:1.0 to usb43827[Sep 22 09:52:44] WARNING[771]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:44] WARNING[771]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 3 (usb43827): Device or resource busy == Set device 1-1:1.0 to usb43825[Sep 22 09:52:46] WARNING[775]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:46] WARNING[775]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 1 (usb43825): Device or resource busy[Sep 22 09:52:47] ERROR[773]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-1878666487' -- Hungup 'DAHDI/pseudo-1877395029' -- Hungup 'DAHDI/pseudo-284221816' -- Hungup 'DAHDI/pseudo-1553727306' -- Hungup 'DAHDI/pseudo-1239774476' -- Hungup 'DAHDI/pseudo-1104776365' == Set device 1-2:1.0 to usb43826[Sep 22 09:52:47] WARNING[774]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:47] WARNING[774]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy == Set device 4-1:1.0 to usb43827[Sep 22 09:52:48] WARNING[771]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:48] ERROR[770]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!! -- Hungup 'DAHDI/pseudo-120543842' -- Hungup 'DAHDI/pseudo-1929022904' -- Hungup 'DAHDI/pseudo-1458793075' -- Hungup 'DAHDI/pseudo-282469731' -- Hungup 'DAHDI/pseudo-1655011998' -- Hungup 'DAHDI/pseudo-682780788' == Set device 1-1:1.0 to usb43825[Sep 22 09:52:48] WARNING[775]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .[Sep 22 09:52:48] WARNING[772]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825][Sep 22 09:52:48] WARNING[772]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all. -- Re-Loading config for repeater 43827[Sep 22 09:52:49] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827[Sep 22 09:52:49] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826 -- Re-Loading config for repeater 43826 -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827[Sep 22 09:52:49] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826 == Set device 1-2:1.0 to usb43826[Sep 22 09:52:51] WARNING[1162]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .[Sep 22 09:52:51] WARNING[1162]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826][Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all. == Set device 4-1:1.0 to usb43827[Sep 22 09:52:52] WARNING[1161]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:52] WARNING[1161]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 3 (usb43827): Device or resource busy == Set device 4-1:1.0 to usb43827[Sep 22 09:52:54] WARNING[1161]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .[Sep 22 09:52:54] WARNING[1159]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827][Sep 22 09:52:54] WARNING[1159]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all.
From: Steve Zingman <szingman at msgstor.com>
To: C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Sent: Thursday, September 22, 2016 8:26 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily
Chris,
Your message went into the wrong folder on my e-mail. Sorry for the delay.
Lets start by NOT auto starting asterisk
add to /etc/init.d/asterisk:
exit 0 after:
DAEMON=/usr/sbin/asterisk
TRUE=/bin/true
So, it should read:
DAEMON=/usr/sbin/asterisk
TRUE=/bin/true
exit 0
reboot and lets see the output of asterisk -vvvcd
73, Steve N4IRS
On 9/21/2016 9:59 PM, C B wrote:
> Hi
>
> Testing a newly built Dial allstarlink server / nodes.
>
> The server is a HP DC5800 1 gig ram and 4 URI’s.
>
> The URI’s where done one at a time, downloading from the allstar web
> configuration.
>
> Sometimes it starts and sometimes it does not, sometimes it stays
> running after I type asterisk at the # prompt.
>
> The log below is some of the output after typing asterisk at the #
> prompt then quickly asterisk –rvvvvvvvvvvvvvvvvvvvvvv
>
> A similar problem that was experienced was due to ACPI.
>
> ACPI was disabled in the BIOS
>
> GRUB_CMDLINE_LINUX_DEFAULT="quiet" was changed to
> GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi=off"
>
> However the server would not boot that way.
>
> Any help greatly appreciated.
>
> Chris
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
--
"Just say no to world domination"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160924/258148f2/attachment.html>
More information about the App_rpt-users
mailing list