[App_rpt-users] How do I setup channel B to generate a PL tone?

[Steve Zingman]

Steve,
Simpleusb does not generate tone. You need usbradio to generate tone.

73, Steve N4IRS

On 09/28/2016 06:15 PM, Steve Smith wrote:
> I am using the RPi2-3 image on a Pi3 and the RB-USB-RIM. I would like 
> to set Channel B to output a PL tone of 110.9 Hz.  In SimpleUSB, I 
> have set txmixb=tone.
> I have set the level to 500.  Using an oscilloscope, I see no output 
> from Channel B.  Where do I set the frequency and how do I enable it?
> Tnx
> Steve
> N8AR
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160928/7c6aa9e2/attachment.html>