[App_rpt-users] Disable the TXENA

[Monty]

When in "Remote Base" mode, the node is essentially dead, will not respond
or do any commands unless another node is connected to it.  Maybe that is
why you are having issues?


Monty

On Fri, Sep 30, 2016 at 8:19 AM, Skyler F <electricity440 at gmail.com> wrote:

> Thank you Monty, first, I meant rptena (my version says txena) but I
> haven't been able to fix that issue, but isn't a really big deal.
>
> If I can run shell scrips from a remote base node, I'm all for using that
> functionality. I haven't been able to get cmd to work from it, however.
>
> Remote VHF - 42622
> Remote UHF - 40764
>
>
> On Thursday, September 29, 2016, Monty <monty at ke7jvx.com> wrote:
>
>> Hi Skyler,
>>
>> Not sure if you ever got a solution for this issue.  I was thinking along
>> the lines Corey was.  If you set this node up as a traditional "Dumb"
>> remote base, then when you go into Command Mode (*4) of that node, the
>> remote base will not transmit.  That way you don't have to use the part of
>> your script the enables and disables your transmitter.  Here's a overview
>> of how to make it a traditional remote base:
>>
>> *rpt.conf:*
>>
>> [1234]
>> rxchannel = SimpleUSB/usb        ; Set for your receive channel / device
>> remote=y                         ; Set as "Dumb" node, as your script will handle the channel changes
>> functions=functions-remote       ; Wherever your functions live
>> phone_functions=functions-remote ; Wherever your functions live
>>
>> [nodes]
>> 1234 = radio at 127.0.0.1/1234,NONE,y ; Remote base node
>>
>>
>>
>> Monty
>>
>> On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440 at gmail.com>
>> wrote:
>>
>>> Then I won't be able to hear the telemetry with the node that has just
>>> connected to the remote base
>>>
>>> On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>>>
>>>> What about using the localplay command rather than the playback command?
>>>>
>>>> On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440 at gmail.com>
>>>> wrote:
>>>>
>>>>> When I do a playback from another LOCAL node, (sharing the same
>>>>> rpt.conf), the remote base will play the audio file over it's transmitter.
>>>>> I was able to solve this problem by disabling the transmitter for the
>>>>> duration of the script so that it does not play any of the telemetry when
>>>>> switching channels.
>>>>>
>>>>> Modifying app_rpt.c  to replace "RPTENA" with "" and then recompiling
>>>>> asterisk did solve the issue so it won't announce anything when I re
>>>>> activate the transmitter.
>>>>>
>>>>> 73
>>>>> Skyler KDØWHB
>>>>>
>>>>> On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer at gmail.com> wrote:
>>>>>
>>>>>> Are you sure you need to disable the TX? I'm pretty sure none of the
>>>>>> telemetry comes out of the remote side.
>>>>>>
>>>>>> On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Is it possible to disable the T X E N A announcement when re
>>>>>>> enabling the transmitter? I have a script which disables the transmitter
>>>>>>> and re-enables every time that I switch channels on my remote base. It is
>>>>>>> sort of annoying that it goes throughout all links that have telemetry
>>>>>>> enabled.
>>>>>>>
>>>>>>> 73
>>>>>>> Skyler
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>>>>> scroll down to the bottom of the page. Enter your email address and press
>>>>>>> the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>>>> the list detailing the problem.
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> --
>>>>>> Tim
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Skyler Fennell
>>>>> amsatnet.info
>>>>> KDØWHB
>>>>> electricity440 at gmail.com
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> --
>>>> Tim
>>>>
>>>
>>>
>>>
>>> --
>>> Skyler Fennell
>>> amsatnet.info
>>> KDØWHB
>>> electricity440 at gmail.com
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160930/d7dfe81b/attachment.html>