[App_rpt-users] Need help - Unexplained noise at startup or asterisk restart

[Kevin Custer]

I'd say you have the polarity of the COS and/or CTCSS backwards 
somewhere, and Asterisk is being told your radio has an open squelch 
which then blasts noise for the duration of the time-out timer.  Are you 
sure it behaves properly from then on?  Does opening the squelch reset 
the TOT and the process start all over again?  If not, maybe your 
COS/CTCSS detection isn't truly working.

Just a guess on my part...

Kevin W3KKC


On 4/14/2017 2:14 AM, Doug Kingston wrote:
> I have a new installation of RPi2-3_V1.5rc2_Allstar.img on a RPi2 with 
> a Repeater Builder RB-USB-RIM (v1B).  Whenever (re)start asterisk, the 
> PPT keys and I get several minutes of noise sent to the radio, 
> followed by the node id and then it unkeys and seems to behave 
> properly from then on.  I am too much of a newbie at Asterisk and 
> Allstar but learning fast.  I am a Linux expert.
>
> Anyone have a clue whats going on here?  I can include config files if 
> needed.
>
> I have attached the output from an asterisk -R window during the reboot.
>
> -Doug-
> KD7DK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170414/8c0da90a/attachment.html>