[App_rpt-users] Adding echolink to Dial

[Steve Zingman]

Enable the echolink channel driver in /etc/asterisk/modules.conf
Change:
noload => chan_echolink.so

To:
load => chan_echolink.so ;

On 12/26/2017 12:45 PM, Steve Siesel wrote:
>
> All,
>
> I am trying to add echolink to my ASL install (Dial). I read the ASL 
> FAQ’s and added the echolink.conf. I also made sure the ports are open 
> as well. Is there anything else I need to do besides adding 
> echolink.conf in the /etc/asterisk directory?
>
> Is there anything else I need to do?
>
> [el0]
>
> confmode=no
>
> call=K4KSA-L      ; Change this!
>
> pwd=*****        ; Change this!
>
> name=Steve Siesel ; Change this to your real name!
>
> qth=Seminole, Florida ; Change this to your actual QTH!
>
> email=steve at siesel.net ; Change this!
>
> maxstns=20
>
> rtcptimeout=10
>
> node=950077 ; Change this!
>
> recfile=/tmp/recorded.gsm
>
> astnode=46031 ; Change this to your active Allstar node number!
>
> context=radio-secure
>
> server1=server1.echolink.org
>
> server2=server2.echolink.org
>
> server3=server3.echolink.org
>
> freq=145.000 ; Freq in MHz
>
> tone=0  ; CTCSS Tone (0 for none)
>
> lat=27.863859  ; Latitude in decimal degrees
>
> lon=--82.833252 ; Longitude in decimal degrees
>
> power=0  ; 0=0W, 1=1W, 2=4W,  3=9W, 4=16W, 5=25W, 6=36W,  7=49W,  
> 8=64W,  9=81W  (Power in Watts)
>
> height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' 
> ,7=1280',8=2560',9=5120' (AMSL in Feet)
>
> gain=0 ; Gain in db (0-9)
>
> dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 
> 6=270deg, 7=315deg, 8=360deg (Direction)
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171226/3c625df6/attachment.html>