[App_rpt-users] DMKx Uri Problem

Sat Feb 11 17:31:30 UTC 2017

I have been using Dial since its release and have no issues with the URI of
course this is with the PC side but essentially the software is fairly
close in both distributions.. Special shout out to Steve N4IRS he did a
great job moving us away from Acid.. As far as tuning and adjusting which
node you want to be connected to that URI I might suggest if your not
already to use radio-tune-menu
Tab works if you get to radio- usually for auto complete... There you can
adjust audio levels an swap URI with node numbers etc... Make sure you save
before exiting the menu.. I am not sure if this works in Dial but in Acid
days I remember modify the node number conf file that had been created via
the radio-tune-menu up at the top of the file it use to point to the USB
location I thought been awhile..

By chance are you new to Linux if so I did create some videos they are
kinda long but they have been useful with others..

73

Loren Tedford (KC9ZHV)
Email: lorentedford at gmail.com
Phone:
Fax:
http://www.lorentedford.com
http://kc9zhv.com

Sent from Droid Turbo from Verizon wireless network

On Feb 11, 2017 8:01 AM, "Bruce B Isaacson" <ike at jmbruce.biz> wrote:

Appreciate all the help! Please keep it coming! Need to fix this or reload.

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Steve Zingman
Sent: Saturday, February 11, 2017 5:56 AM
To: Bob; Users
Subject: Re: [App_rpt-users] DMKx Uri Problem

I disagree.  URI Diag works in DIAL. URIDiag has  problem on the Pi.
Works fine on a X86.
Sent via smoke signal (AT&T)
On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:

I chased this for awhile until I realized uridiag does not work with DIAL.
Chasing that down was not up very high on anyone's list. I've chased URI
and URIx issues, and the likelihood of it being the problem is slim to
none. On the other hand, Bryan's suggestions are worth the time chasing :-)

Thanks,
Bob
k6ecm
73

Sent from iPad

> On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike at jmbruce.biz> wrote:
>
> Hi Bryan,
> There is a deeper problem than Asterisk.  The program I am using is a
stand-alone program designed to test DMK URIx dongle.  Based on the test
there is a problem other than Asterisk or uridiag. As for usbradio... there
is no audio as there is no audio in the uridiag program that is why I
believe that it might be a driver.  I have been trying to avoid
reinstalling Dial or possibly doing a Virtual box install on another
computer.
>
> Thanks for your input.
>
> -----Original Message-----
> From: App_rpt-users
> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of
> Bryan D. Boyle
> Sent: Friday, February 10, 2017 4:37 PM
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] DMKx Uri Problem
>
>> On 2/10/2017 2:54 PM, Bruce B Isaacson wrote:
>> Hello,
>
> What version of the asterisk/allstar are you using?
>
> What does the device= line look like in your usbradio_tune_usbxxxx.conf
look like?
>
> Is rpt.conf pointing to the right usb device (should be the rxchannel=
> line, where usbxxxx in this line should be the same as the usbxxxx in
> the tune file name
>
> --
> Bryan D. Boyle
> Morrisville PA
> http://www.wb0yle.com
> http://www.lotuseuropa.us
>
> #include funny.quote.here
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users
and scroll down to the bottom of the page. Enter your email address and
press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170211/90735ba0/attachment.html>