[App_rpt-users] uridiag fixed for DIAL

Sun Feb 12 22:25:31 UTC 2017

The Release Candidate for DIAL x86/64 is at

<http://dvswitch.org/files/DIAL/amd64-i386-DIAL-RC1.tar.gz>

The release Candidate for DIAL RPi is at

<http://dvswitch.org/files/DIAL/RAT_RC1.tar.gz>

73, Steve N4IRS


On 02/12/2017 05:22 PM, Steven Donegan wrote:
> Hmmm, well I guess I need to find current instructions for DIAL then 
> :-) Thanks for the assist!
> Steven Donegan
> KK6IVC General Class FCC License
> FAA PP-ASEL Pilots License
> Silver State Car #86
> www.sscc.us
>
>
> On Sunday, February 12, 2017 2:20 PM, Steve Zingman 
> <szingman at msgstor.com> wrote:
>
>
> Sorry,
> That is not DIAL. it's HAMVIOP
>
> On 02/12/2017 05:17 PM, Steven Donegan wrote:
>> [root at repeater utils]# ls
>> asterisk hamlib                  watchdog
>> dahdi-linux-complete-2.10.0.1+2.10.0.1 pcsensor-temper-master
>>
>> This was a very early DIAL image for the Pi 3 I believe. If it needs 
>> a refresh I am more than happy to use the latest - no need to fix 
>> something 'ancient' so to speak :-)
>> Steven Donegan
>> KK6IVC General Class FCC License
>> FAA PP-ASEL Pilots License
>> Silver State Car #86
>> www.sscc.us <http://www.sscc.us/>
>>
>>
>> On Sunday, February 12, 2017 2:10 PM, Steve Zingman 
>> <szingman at msgstor.com> <mailto:szingman at msgstor.com> wrote:
>>
>>
>> You sure it's DIAL? What is in the utils directory?
>>
>> On 02/12/2017 05:06 PM, Steven Donegan wrote:
>>> Well, it was taken directly from a very early SD image you released and:
>>>
>>> [root at repeater src]# ls /usr/src
>>> examples  utils
>>> [root at repeater src]#
>>>
>>> Nothing at all there. So following the instructions of your earlier 
>>> post appears to not be possible. What am I missing?
>>>
>>> Thanks.
>>> Steven Donegan
>>> KK6IVC General Class FCC License
>>> FAA PP-ASEL Pilots License
>>> Silver State Car #86
>>> www.sscc.us <http://www.sscc.us/>
>>>
>>>
>>> On Sunday, February 12, 2017 2:03 PM, Steve Zingman 
>>> <szingman at msgstor.com> <mailto:szingman at msgstor.com> wrote:
>>>
>>>
>>> Steve,
>>> You should have the source. All DIAL installs contained the source. 
>>> Older versions of DIAL did not include uridiag.
>>> 73, Steve N4IRS
>>>
>>> On 02/12/2017 04:53 PM, Steven Donegan wrote:
>>>> I do not appear to have any of the DIAL source on my DIAL repeater 
>>>> - so how would I fetch the entire tree? I tried cloning AllStarLink 
>>>> without success. Thanks!
>>>> Steven Donegan
>>>> KK6IVC General Class FCC License
>>>> FAA PP-ASEL Pilots License
>>>> Silver State Car #86
>>>> www.sscc.us <http://www.sscc.us/>
>>>>
>>>>
>>>> On Sunday, February 12, 2017 1:43 PM, Steve Zingman 
>>>> <szingman at msgstor.com> <mailto:szingman at msgstor.com> wrote:
>>>>
>>>>
>>>> Well,
>>>>
>>>> I'm back after 3 days at the Orlando Hamfest. I had a great time 
>>>> meeting
>>>> with quite a few ASL users that found me out in the flea market. ( 
>>>> have
>>>> no idea how) I also had a chance to meet with a couple of hardware
>>>> vendors about going forward with ASL. More on this later. Thanks to 
>>>> all.
>>>>
>>>> We have found the bug in uridiag that fails a known good URI with the
>>>> loopback connector. In short, uridiag was not properly setting the 
>>>> audio
>>>> output level. This does not in anyway affect the operation of 
>>>> either USB
>>>> channel driver during normal asterisk operation.
>>>>
>>>> As with all ASL software, the source is published on GitHub at
>>>> <https://github.com/AllStarLink> in the uridiag repository.
>>>>
>>>> For those that want to fix uridiag on their existing installations:
>>>>
>>>> login as root
>>>>
>>>> cd /usr/src/astsrc-1.4.23-pre/
>>>>
>>>> rm -rf uridiag
>>>>
>>>> git clone https://github.com/AllStarLink/uridiag.git
>>>>
>>>> cd uridiag
>>>>
>>>> make
>>>>
>>>> cp uridiag /usr/local/bin
>>>>
>>>> You can now run the new uridiag. Make sure asterisk is NOT running.
>>>>
>>>> connect the loopback connector
>>>>
>>>> run uridiag
>>>>
>>>> 73, Steve N4IRS
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -- 
>>>> ---
>>>> "Real programmers use vi, that's why I use nano."
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org 
>>>> <mailto:App_rpt-users at lists.allstarlink.org>
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit 
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>>>> and scroll down to the bottom of the page. Enter your email address 
>>>> and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email 
>>>> confirmation. If you have trouble unsubscribing, please send a 
>>>> message to the list detailing the problem.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org 
>>>> <mailto:App_rpt-users at lists.allstarlink.org>
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org 
>>> <mailto:App_rpt-users at lists.allstarlink.org>
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit 
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>>> and scroll down to the bottom of the page. Enter your email address 
>>> and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email 
>>> confirmation. If you have trouble unsubscribing, please send a 
>>> message to the list detailing the problem.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org 
>>> <mailto:App_rpt-users at lists.allstarlink.org>
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org 
> <mailto:App_rpt-users at lists.allstarlink.org>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170212/084a60d6/attachment.html>