[App_rpt-users] URI Hook up for Yaesu VXR-7000

[Kevin Custer]

On 2/15/2017 4:18 PM, Angeo wrote:
>
> Bob,
>
> Thanks for the reply.  As it turns out, the repeater COR is not 
> working.  So, using the option of the connections listed
>
> below would not work.
>
>
>  I am wondering if anyone has been able to get this repeater to work 
> with DSP instead of Simple USB mode?? This would be the ideal way to 
> go for us.
>

I have a node (2302) using a VXR-7000 / DIAL on a X86 (PC) (not that it 
matters) using DSP on a URIx.  I don't remember if I did anything 
special - but I don't think I did.
I'm going to drive out to the site and document the wiring - not sure 
when I'll have the time, but maybe over the weekend - maybe before.

I know that we continued to use the CTCSS generation in the VXR-7000 - 
as opposed to doing it in software.  This way, we can depress the 
"Remote" switch (turning it off) and go back to in-cabinet controls if 
the computer, app_rpt, or the interface fails.

I've uploaded the rpt and usbradio configuration files to this site:
http://www.masterscommunications.com/temp/2302/

Kevin - W3KKC