[App_rpt-users] Bind echolink channel driver to 2 nodes?

[Neil k8it]

you are correct. the driber will only bind to one node.
so just bind it to your private node and then connect your public node to it either by command or schedule or permanetly.



Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479


From: KM6HK 
Sent: Monday, January 23, 2017 7:07 PM
To: David KE6UPI 
Cc: app rpt users 
Subject: Re: [App_rpt-users] Bind echolink channel driver to 2 nodes?


I probably did not state my question clearly enough.  


The channel driver appears to be only able to bind ONE discrete echolink node number to ONE discrete Allstar node number using the line isn the conf file:
node=12345(this is some echolink node number that your have registered in the global echolink system)
astnode= 98765(this is some public allstar node)
astnode=4321(this is some private allstar node running on the same system)
but  then second “astnode” above may not be a correct syntax ???


-KM6HK


  On Jan 23, 2017, at 2:07 PM, David KE6UPI <dshaw at ke6upi.com> wrote:


  As Jim would say "WHY" then no.. You would have to connect to the node with EchoLink running. Then pass the connect codes to that server.. I think its *4.. But I haven't done that in alone time. 


  David 
  KE6UPI


  On Mon, Jan 23, 2017 at 11:30 AM, KM6HK <km6hk at icloud.com> wrote:

    I just enabled a private node on my CentOS install.
    The main public node #41477 is currently bound to the echolink channel driver.
    How do I also concurrently bind it to the other private node #1477  as well as 41477?

    The entry in the echolink.conf file is: astnode=41477

    can one do astnode=41477,1477   ;or some such kludge?


    Any Help appreciated.

    -KM6HK
    _______________________________________________
    App_rpt-users mailing list
    App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

    To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
    You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.







--------------------------------------------------------------------------------


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7998 / Virus Database: 4749/13818 - Release Date: 01/23/17
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170123/7498844c/attachment.html>