[App_rpt-users] RPi w/DIAL Repeater Stuck In Transmit Mode

[Steve Zingman]

Bob,
I would like to see the system and asterisk logs, to try determine the 
nature of the  failure. Did the system respond to any DTMF commands? I 
don't know of this happening to someone else. I would also suggest using 
the "release candidate" version of DIAL for the RPi. It can be 
downloaded at <http://dvswitch.org/files/DIAL/RAT_RC1.tar.gz>

73, Steve N4IRS

On 03/08/2017 02:04 AM, Bob Pyke wrote:
> Our repeater hung up in transmit mode, and would not respond to radio DTMF commands to restart Asterisk or reboot. We had to manually reset the power. We don't understand why. If this should be a reoccurring issue, perhaps we need an external watchdog timer to reset power after x minutes of constant PTT activation.
>
> Looking for suggestions.
>
> We are planning to setup a remote (no internet) repeater that is not easily accessible, so want to make sure we have a solution.
>
> Thanks,
> Bob
> k6ecm
> 73
>
> Sent from iPad
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.