[App_rpt-users] RPi 3 controller problem

[Bryan Taylor]

First guess is the wifi, works much better on Ethernet 

Bryan
VO1MXZ 

Sent from my iPhone

> On Mar 16, 2017, at 2:36 PM, William Higgins <higgins.ws at gmail.com> wrote:
> 
> Good day!
> 
> We have recently replaced the CAT-200 controller on our repeater with a Raspberry Pi 3 running the Dial RC1 distribution.  Mostly it seems to be working ok, but we are getting relatively frequent audio dropouts in the middle of conversations.  At times we can go for several minutes of conversation without a dropout, and at other times, it seems like it happens a lot more frequently.  Sometimes it's just for a couple of tenths of a second and sometimes it's up to a few seconds long.  So far I have had no luck in trying to track down the cause of this.  Any thoughts anyone might have about what might be happening or where to look next would be appreciated.
> 
> Some details about our config:
> 
> Raspberry Pi 3 with DIAL RAT_RC1.img
> Repeater Builder RB-USB Rim Lite Interface
> Vertex VXR-7000 Repeater
> Metallic case for the Pi
> Modular connectors and Cat-7 cable for the interface with snap-on chokes at both ends
> Pi is connected to the local network via Wifi (We are prepared to move this to Ethernet, but need approval of the host to do so)
> Pi is connected to an external server via OpenVPN for collection of mgmt. statistics via SNMP
> Pi also runs Apache2 and Allmon2
> Echolink is enabled (Node 746074)
> AllStarLink of course (Node 44011)
> 
> Thanks in advance for any thoughts or help you might be able to give!
> 
> Bill Higgins
> N0NOE
> 
> KC0DBS repeater on 44011
> N0NOE simplex on 43758
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.