[App_rpt-users] Node numbering

[Leighton Judd]

Thanks Steve,

I will do that and renumber my private nodes.

I have put in the node stanzas. It was interesting that trying to connect
to 3333 didn't report anything in a very verbose asterisk console. So I was
a little stuck in my understanding of it.

73,
Leighton

On Mon, 27 Mar 2017 at 10:54, Steve Zingman <szingman at msgstor.com> wrote:

> Pretty much keep your private node numbers below 2000 and you will be OK.
> Also make sure you have the proper entries in the nodes stanza. See:
> <http://docs.allstarlink.org/drupal/node/66>
> <http://docs.allstarlink.org/drupal/node/66>
>
> 73, Steve N4IRS
>
>
> On 03/26/2017 07:44 PM, Leighton Judd wrote:
>
> Thanks Corey,
>
> I thought the same thing, however it doesn't work for nodes starting with
> 3. It seems to work for other numbering ranges, but not starting with 3.
>
> Maybe I am missing something there.
>
> Renumbering isn't a problem. It was just going to be neater if I could do
> it that way, that is all. I also hadn't been able to find reference to the
> restriction of using these numbers if creating a private linking system.
>
> 73,
> Leighton
>
>
> On Mon, 27 Mar 2017 at 10:38, Corey Dean <n3fe at repeater.net> wrote:
>
> As long as you have the number node numbers defined with the IP address
> and port in rpt.conf and they have the forwarding setup correctly they
> should work just fine.
>
> Corey. N3FE
>
> Sent from my iPhone
>
> > On Mar 26, 2017, at 7:13 PM, Leighton Judd <leighton.judd at gmail.com>
> wrote:
> >
> > Hi All,
> >
> > I have recently started experimenting with app_rpt.
> >
> > I am wondering if there are any restrictions on numbering of private
> nodes?
> >
> > I have set up two nodes on the same machine for a test. They are each
> set up as a "hub" with numbers 2222 and 3333.
> >
> > Using the asterisk console, I can connect successfully from node 3333 to
> node 2222. Trying to connect from node 2222 to node 3333 does not work.
> This seems to be true for node numbers, that I have tested, beginning with
> 3000.
> >
> > This connects:
> > rpt cmd 3333 ilink 3 2222
> >
> > This doesn't connect:
> > rpt cmd 2222 ilink 3 3333
> >
> > Does anyone know if this is intended or not?
> >
> > Regards,
> > Leighton
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170326/f5ec78fc/attachment.html>