[App_rpt-users] Allstarlink loop?

Tue Mar 28 23:02:13 UTC 2017

That will not happen under normal conditions. App_rpt does get confused at
times. Reboot everything one at a time until the problem goes away. If you
have start up macros the last boot may not be the culprit.

On Tue, Mar 28, 2017 at 11:54 AM, Mike - W5JR <w5jr.lists at gmail.com> wrote:

> "Remote already in this mode" will only be heard if the telemetry message
> setting is allowed/active. A COP_34 (common to be function 934) will
> disable telemetry such as this, along with a whole list of other useful
> telemetry messages. The infamous COP_35 will allow telemetry messages for
> about a minute and suppress them afterwards. COP_33 turns all telemetry
> messaging back on.
>
> tnx
> Mike / W5JR
> Alpharetta GA
>
> > On Mar 28, 2017, at 11:17 AM, Benjamin L. Naber <benjamin at project23d.com>
> wrote:
> >
> > There wasn't an echo, delay wasn't any more than normal and we were not
> > using permalinks. I was able to create the same situation again using
> > *3
> >
> > odd to me that it kept repeating the connection status of a remote node
> > that was *not* a part of the loop.
> >
> > I elected to take it a step further and see if I could create a mesh
> > between three nodes. I was successful. And it was a mess, haha!
> >
> > ~Benjamin, KB9LFZ
> >
> >
> >> On Tue, 2017-03-28 at 13:38 +0000, Monty wrote:
> >> Benjamin,
> >>
> >> Is there an echo, besides the normal delayed audio, in this scenario?
> >> Seems to me, reading through your logs, that's the nodes are trying
> >> to connect but not actually connected. I have seen something similar,
> >> but not in a loop, when dealing with permalinks. The other Node is
> >> not connecting, due to some sort of discrepancy, but in the "web link
> >> view" it shows them connected, even though they are not.
> >>
> >> May be way off base, but that is what I have seen.  Also the only way
> >> something would change is if you update it. I don't believe we have
> >> auto update, yet.
> >>
> >> Monty
> >>
> >>
> >> On Mon, Mar 27, 2017 at 7:52 PM Benjamin L. Naber <benjamin at project23
> >> d.com> wrote:
> >>> Not sure that was necessary..
> >>>
> >>> In any event, before the Allstarlink server(s) were reset about
> >>> five days ago prior to today, if the following:
> >>> 28569 <-> 41575 <-> 45222
> >>>
> >>> and 28569 were to connect to 45297, and the end users on 45297
> >>> didn't know or pay attention that it was connected, and the user on
> >>> 45297 tried connecting to 45222, the 45297 node would respond with
> >>> "Remote already in this mode"
> >>>
> >>> Now, it does not do that.
> >>>
> >>> There was the possibility the possibly allstarlink wasn't aware of
> >>> connections made when external node connections were made, if the
> >>> external nodes connected were in the rpt.conf. However, prior to
> >>> five days ago, the above scenario would be the same.
> >>>
> >>> Something change? What changes are being made to warrant the
> >>> allstarlink servers being reset (evidence being the unused nodes
> >>> all have the same last ke-up time)
> >>>
> >>> ~Benjamin, KB9LFZ
> >>>
> >>>
> >>>
> >>>> On Mon, 2017-03-27 at 20:54 -0500, Justin Reed wrote:
> >>>> I always wondered what would happen if some dipshit did this.
> >>>>
> >>>> Question answered ;)
> >>>>
> >>>> 73,
> >>>> Justin
> >>>> NV8Q
> >>>>
> >>>>
> >>>>> On 3/27/2017 8:14 PM, Benjamin L. Naber wrote:
> >>>>> Uh, I was under the impression this wasn't possible, have a
> >>>>> look at a
> >>>>> the picture.
> >>>>>
> >>>>> If I don't break the connection using the almight *4 command,
> >>>>> as
> >>>>> someone on the 45297 insists on using the permanent link
> >>>>> command, have
> >>>>> a look-see at my node, 28569
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> App_rpt-users mailing list
> >>>>> App_rpt-users at lists.allstarlink.org
> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> >>>>> sers
> >>>>>
> >>>>> To unsubscribe from this list please visit http://lists.allstar
> >>>>> link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> >>>>> to the bottom of the page. Enter your email address and press
> >>>>> the "Unsubscribe or edit options button"
> >>>>> You do not need a password to unsubscribe, you can do it via
> >>>>> email confirmation. If you have trouble unsubscribing, please
> >>>>> send a message to the list detailing the problem.
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at lists.allstarlink.org
> >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
> >>>> rs
> >>>>
> >>>> To unsubscribe from this list please visit http://lists.allstarli
> >>>> nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> >>>> the bottom of the page. Enter your email address and press the
> >>>> "Unsubscribe or edit options button"
> >>>> You do not need a password to unsubscribe, you can do it via
> >>>> email confirmation. If you have trouble unsubscribing, please
> >>>> send a message to the list detailing the problem.
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at lists.allstarlink.org
> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> To unsubscribe from this list please visit http://lists.allstarlink
> >>> .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> >>> bottom of the page. Enter your email address and press the
> >>> "Unsubscribe or edit options button"
> >>> You do not need a password to unsubscribe, you can do it via email
> >>> confirmation. If you have trouble unsubscribing, please send a
> >>> message to the list detailing the problem.
> >> --
> >>
> >> Monty
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit http://lists.allstarlink.o
> >> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> >> bottom of the page. Enter your email address and press the
> >> "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a
> >> message to the list detailing the problem.
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>

-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170328/5f2b445b/attachment.html>