[App_rpt-users] Temporary stop, then restart asterisk

[Mike - W5JR]

Do want to stop AllStar/Asterisk or just turn the repeater off? There is a COP command for the latter. I'm not in front of a terminal to get you the command. 

tnx
Mike / W5JR
Alpharetta GA

> On May 26, 2017, at 11:46 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> Hmmm... sounds like an update is in order :-)
> 
> Thanks much,
> Bob
> 
> Sent from my iPhone
> 
>> On May 26, 2017, at 8:41 AM, Steve Zingman <szingman at msgstor.com> wrote:
>> 
>> OK,
>> /etc/init.d/asterisk stop <--- Stop asterisk
>> killall -9 asterisk <---------------- Make sure it's dead
>> ps ax | grep asterisk <--- Check to see if it's really dead
>> 
>> /etc/init.d/asterisk start <--- start asterisk
>> ps ax | grep asterisk <--- Check to see if it's really started
>> 
>> The newer release candidate fixes this.
>> 
>> 73, Steve N4IRS
>> 
>> 
>>> On 5/26/2017 11:37 AM, Bob Pyke wrote:
>>> No. It will be off for several minutes, but I want it to stop when commanded, and start on command. We are conducting an exercise. I don't know the version, and logging into the node does not say. We've been operating, pretty much since the introduction of app_rpt on the RPi
>>> 
>>> Thanks
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 26, 2017, at 8:31 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>> 
>>>> Bob,
>>>> Are you talking about "bouncing" asterisk? A stop followed by a rapid start? Which distribution and version are you running?
>>>> 
>>>> 73, Steve N4IRS
>>>> 
>>>>> On 5/26/2017 11:28 AM, Bob Pyke wrote:
>>>>> I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
>>>>> 
>>>>> Thanks,
>>>>> Bob
>>>>> Sent from my iPhone
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.