[App_rpt-users] Temporary stop, then restart asterisk

[Bryan D. Boyle]

cop 2 system enable
cop 3 system disable

--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.



> On May 26, 2017, at 11:57, Mike - W5JR <w5jr.lists at gmail.com> wrote:
> 
> Do want to stop AllStar/Asterisk or just turn the repeater off? There is a COP command for the latter. I'm not in front of a terminal to get you the command. 
> 
> tnx
> Mike / W5JR
> Alpharetta GA
> 
>> On May 26, 2017, at 11:46 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>> 
>> Hmmm... sounds like an update is in order :-)
>> 
>> Thanks much,
>> Bob
>> 
>> Sent from my iPhone
>> 
>>> On May 26, 2017, at 8:41 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>> 
>>> OK,
>>> /etc/init.d/asterisk stop <--- Stop asterisk
>>> killall -9 asterisk <---------------- Make sure it's dead
>>> ps ax | grep asterisk <--- Check to see if it's really dead
>>> 
>>> /etc/init.d/asterisk start <--- start asterisk
>>> ps ax | grep asterisk <--- Check to see if it's really started
>>> 
>>> The newer release candidate fixes this.
>>> 
>>> 73, Steve N4IRS
>>> 
>>> 
>>>> On 5/26/2017 11:37 AM, Bob Pyke wrote:
>>>> No. It will be off for several minutes, but I want it to stop when commanded, and start on command. We are conducting an exercise. I don't know the version, and logging into the node does not say. We've been operating, pretty much since the introduction of app_rpt on the RPi
>>>> 
>>>> Thanks
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On May 26, 2017, at 8:31 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>>> 
>>>>> Bob,
>>>>> Are you talking about "bouncing" asterisk? A stop followed by a rapid start? Which distribution and version are you running?
>>>>> 
>>>>> 73, Steve N4IRS
>>>>> 
>>>>>> On 5/26/2017 11:28 AM, Bob Pyke wrote:
>>>>>> I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
>>>>>> 
>>>>>> Thanks,
>>>>>> Bob
>>>>>> Sent from my iPhone
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If y
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170526/139837df/attachment.html>