[App_rpt-users] Temporary stop, then restart asterisk

[Steve Mahler]

Bob:

You could use system states ... one command from the console or one DTMF 
command can enable / disable the repeater.  Check rpt.conf for system 
states.  I use it.

...STeve - KF5VH


On 5/26/2017 10:28 AM, Bob Pyke wrote:
> I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
>
> Thanks,
> Bob
> Sent from my iPhone
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com