[App_rpt-users] Temporary stop, then restart asterisk

[Bob]

Cool, that works. 

 

Thanks much!

Bob

 

  _____  

From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Steve Mahler
Sent: Sunday, May 28, 2017 11:05 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Temporary stop, then restart asterisk

 

Sure, make a macro that mutes telemetry ... cop 34 then enables or disables
the repeater ...  cpo [23], set telemetry back to previous state ... cop 33
.  It works for me.

...STeve - KF5VH

 

On 5/28/2017 11:49 AM, Bob wrote:

The cop,2 and cop,3 DTMF approach works quickly, which is what I need.
However, cop,2 reports "r p t e n a." Is there any way to quiet just this
response, and not the others, or perhaps substitute "status,2?"

 

Thanks much all,

Bob

 


  _____  


From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Tim Sawyer
Sent: Saturday, May 27, 2017 19:56 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Temporary stop, then restart asterisk

 

What? That's a weird way to do it when you could just:

 

85 = cop,2

86 = cop,3 

 

Besides calling scripts when you don't have to is bad form and dangerous. 

 

On Fri, May 26, 2017 at 10:26 AM, Bryan D. Boyle <bdboyle at bdboyle.com>
wrote:

or...assign a couple DTMF functions in rpt.conf, for instance:

85 = cmd,/etc/asterisk/scripts/enable.sh
86 = cmd,/etc/asterisk/scripts/disable.sh

where, in a /scripts directory under /etc/asterisk, there are two scripts as
above...
enable.sh:

#!/bin/bash
/usr/sbin/asterisk -rx "rpt cmd nodenumber cop 2 nodenumber"

disable.sh
(replace the 2 with a 3)

chmod 755 [enable.sh, disable.sh]

rasterisk
rpt reload

lots of ways to skin the cat.  Remember, not only is asterisk/allstar
functionally rich...but you can also use the underlying OS to do many
wonderful and various things both to itself as well as the application.
There are no limits to the creativity...



On 5/26/2017 12:43 PM, Steve Zingman wrote:

As you said, it was when DIAL first released for the RPi so it's 1.0
>From the asterisk CLI:
rpt cmd 1999 cop 2 1999 <------------ system enable
rpt cmd 1999 cop 3 1999 <------------ system disable

 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlin <mailto:App_rpt-users at lists.allstarlink.org>
k.org
http://lists.allstarlink.org/c
<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
gi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c
<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 





 

-- 

--

Tim

 


 
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
paign=sig-email&utm_content=emailclient> 

Virus-free.
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
paign=sig-email&utm_content=emailclient> www.avg.com 








_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
 
To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170528/1d1642ab/attachment.html>