[App_rpt-users] Pi Zero W?

[Will Bashlor]

I tried DIAL and hamvoip versions, neither would boot on the Pi Zero W.

I'm not a programmer and don't usually compile anything at all, actually I
try to avoid it. I'm guessing AllStar can be compiled manually with
Raspbian Lite. If anyone has any links or instructions how I can compile
AllStar on Raspbian Lite I'd be glad to try and attempt it. In the mean
time I'll begin researching it. 73

On Tue, Nov 7, 2017 at 5:56 PM, Andrew Sylthe <asylthe at kc9ona.com> wrote:

> The build you mentioned doesn't support the Pi Zero.
>
> On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael at lockwood.us.com>
> wrote:
>
>> Why not use the app_rpt build that’s already setup for RPi?
>>
>> www.hamvoip.org
>>
>> ------------------------------
>> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> on
>> behalf of Will Bashlor <will at bashlor.com>
>> *Sent:* Tuesday, November 7, 2017 3:46:26 PM
>> *To:* 'Users of Asterisk app_rpt'
>> *Subject:* Re: [App_rpt-users] Pi Zero W?
>>
>>
>> Nothing to report, but I just purchased a Pi Zero W yesterday for testing
>> with AllStar. It should be here Friday.
>>
>>
>>
>> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
>> *On Behalf Of *William Higgins
>> *Sent:* Tuesday, November 7, 2017 4:25 PM
>> *To:* app_rpt-users at lists.allstarlink.org
>> *Subject:* [App_rpt-users] Pi Zero W?
>>
>>
>>
>> I have tried using the regular DIAL RAT_RC1 image and it doesn't boot.
>> (Just took a shot.)
>>
>>
>>
>> Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi
>> Zero W with regular Raspbian Light on it?  What experiences did you have?
>>
>>
>>
>> Thinking about a very low power mobile node.
>>
>>
>>
>> Bill
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171111/2cff67a3/attachment.html>