[App_rpt-users] chan_usbradio.c error

[Bob]

I periodically experience the following error on the RPi3 with DIAL
(/var/log/asterisk/messages). Any clues? The repeater uses a URIx, and the
Linux address for the USB is the same as devstr= in usbradio_tune_usb.conf

ERROR[537] chan_usbradio.c: HID process has died or something!!

[Nov 12 13:17:07] NOTICE[538] chan_usbradio.c: Assigned USB device 1-1.2:1.0
to usbradio channel usb
[Nov 12 13:17:07] WARNING[538] chan_usbradio.c: Loaded parameters from
usbradio_tune_usb.conf for device usb .
[Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Possibly stuck USB read
channel. [usb]
[Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Nope, USB read channel [usb]
wasn't stuck after all.
[Nov 12 13:38:16] ERROR[537] chan_usbradio.c: HID process has died or
something!!
[Nov 12 13:38:16] WARNING[520] app_rpt.c: rpt_thread restarted on node <#
redacted>

The 21 min delay from the prior message is typical. After the error, it
restarts asterisk, and the startup macro reconnects the repeater.

Thanks,
Bob
k6ecm