[App_rpt-users] iPhone Verizon Hot Spot Issues

[David Shaw]

The Hotspot gets an IP address and then ASL needs to update the node list
server. Then the clients needs to update the nodes list. So this can take
sometime. So it can take around 30 minutes or so. For testing, let your
hotspot ASL node run about an hour. Then see if you can connect.

Outbound doesn't need the ports open.

David



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Wed, Nov 15, 2017 at 12:07 PM, Will Bashlor <will at bashlor.com> wrote:

> Thanks Carl,
>
>
>
> Yes, I am using my hot spot for a portable allstar node. I understand that
> with Verizon port forwarding is impossible without the one-time $500 static
> IP, however port forwarding shouldn’t be required for outbound only
> connections. It’s odd, I can attempt to connect to a node and it never
> connects, then 5 minutes later I can try again, and it does connect. Or I
> may try node AAAAA and it doesn’t connect, then BBBBB and it connects, then
> AAAAA and it doesn’t connect. But others can connect to AAAAA. Or when I
> get to work or home on WiFi then I can connect to AAAAA. Then 10 minutes
> later I leave the house and I connect to AAAAA just fine. In other words,
> there is no logical pattern lol.
>
>
>
> I guess I need to start writing down what nodes and can and can’t connect
> to, and when. And start watching the Asterisk CLI to tell me what’s going
> on. I’m a network engineer working for an Internet service provider, so I
> can troubleshoot, but I haven’t began troubleshooting yet. I was just
> probing the community beforehand which could save me some time in the long
> run. I figured (hoping) someone have had to run into this before with all
> the portable nodes already out there.
>
>
>
> 73
>
> Will, KE4IAJ
>
> TARG <https://www.facebook.com/profile.php?id=196073504193006&ref=br_rs>
> AEC
>
>
>
>
>
>
>
> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
> *On Behalf Of *Carl
> *Sent:* Wednesday, November 15, 2017 2:32 PM
> *To:* 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
> *Subject:* Re: [App_rpt-users] iPhone Verizon Hot Spot Issues
>
>
>
> Are you trying to use your phone as a hot spot for the Asterisk device?
> If so, you will run into issues with port access. All of the major carriers
> (Verizon, AT&T, Sprint, T-Mobile) have laid out there LTE networks in a
> manner that result in dual-NATing, there is no way to port forward from the
> “real” internet address to a device connected to your hotspot.  Verizon
> will give you a static IP with ports available for a mere one-time fee of
> $500. I don’t know what other carriers want.
>
> Carl, N7KUW
>
>
>
> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org
> <app_rpt-users-bounces at lists.allstarlink.org>] *On Behalf Of *Will Bashlor
> *Sent:* Wednesday, November 15, 2017 11:03 AM
> *To:* 'Users of Asterisk app_rpt'
> *Subject:* [App_rpt-users] iPhone Verizon Hot Spot Issues
>
>
>
> Hi All,
>
>
>
> Anyone use their iPhone hot spot on Verizon? Any issues? Mine gives me a
> fit not wanting to connect to most any node (mine and others) most of the
> time. After constantly rebooting my node and phone several times, and
> retrying to connect to various nodes, sometimes it’s eventually successful.
>
>
>
> Any similar experiences? Suggestions?
>
>
>
> 73
>
> Will, KE4IAJ
>
> TARG <https://www.facebook.com/profile.php?id=196073504193006&ref=br_rs>
> AEC
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171115/177c1410/attachment.html>