[App_rpt-users] simpleusb-tune-menu

[Benjamin Naber]

Evidently, I failed to mention rpt.conf *had* two other pseudo nodes.

in a series of last ditch attempts (one more again! Dammit, does this
work? No?! WTF?! Let's try this! Not it either?! man....)

nodesetup.sh was run and configs were downloaded from the ASL portal.
Interesting to note that while 29314 is a DAHDI/pseudo node, there is
text for 29314 in simpleusb.conf. Um?

Yes, it works now, however, missing many line items in rpt.conf that
came with DIAL 8.5.

I would like to understand what simpleusb-tune-menu is looking for, and
what else changed in my particular case when configs were downloaded
from ASL portal versus what came stock with DIAL 8.5.

I'm tired, but we'll see what else I can break tomorrow.

~Benjamin, KB9LFZ

P.S. Almighty code maintainers, PLEASE do not take my lamenting as a
lack of dis-credit. You guys do significantly more than I can ever do,
so I sincerely say, "I am not worthy!"





On Tue, 2017-10-17 at 23:12 -0500, Benjamin Naber wrote:
> alright, so things did NOT go as planned with a fresh install.
> 
> This is the lovely message I get, and I got it once before, only to
> have solved, if memory recalls, by doing a complete re-install. Of
> which I do NOT want to do again.
> 
> I've had this issue in the past, in 2013, and the issue never got
> solved.
> 
> FWIW, the URI was plugged in during the install and when running
> firsttime.sh
> 
> asterisk -r
> [Oct 17 22:52:16] NOTICE[6334]: app_rpt.c:22024 rpt_master: RPT
> thread
> restarted on 28569
> [Oct 17 22:52:16] WARNING[6334]: app_rpt.c:22036 rpt_master:
> rpt_thread
> restarted on node 28569
> [Oct 17 22:52:16] WARNING[6366]: channel.c:3051 ast_request: No
> channel
> type registered for 'SimpleUSB'
> [Oct 17 22:52:18] NOTICE[6334]: app_rpt.c:22024 rpt_master: RPT
> thread
> restarted on 28569
> [Oct 17 22:52:18] WARNING[6334]: app_rpt.c:22036 rpt_master:
> rpt_thread
> restarted on node 28569
> [Oct 17 22:52:18] WARNING[6369]: channel.c:3051 ast_request: No
> channel
> type registered for 'SimpleUSB'
> [Oct 17 22:52:20] NOTICE[6334]: app_rpt.c:22024 rpt_master: RPT
> thread
> restarted on 28569
> [Oct 17 22:52:20] WARNING[6334]: app_rpt.c:22036 rpt_master:
> rpt_thread
> restarted on node 28569
> [Oct 17 22:52:20] WARNING[6370]: channel.c:3051 ast_request: No
> channel
> type registered for 'SimpleUSB'
> [Oct 17 22:52:22] NOTICE[6334]: app_rpt.c:22024 rpt_master: RPT
> thread
> restarted on 28569
> [Oct 17 22:52:22] WARNING[6334]: app_rpt.c:22036 rpt_master:
> rpt_thread
> restarted on node 28569
> [Oct 17 22:52:22] WARNING[6373]: channel.c:3051 ast_request: No
> channel
> type registered for 'SimpleUSB'
> [Oct 17 22:52:24] ERROR[6334]: app_rpt.c:22019 rpt_master: Continual
> RPT thread restarts, killing Asterisk
> repeater*CLI> 
> Disconnected from Asterisk server
> 
> 
> # simpleusb-tune-menu
> Error parsing device parameters
> 
> 
> # nano rpt.conf:
> rxchannel=SimpleUSB/usb_28569
> ...
> 
> # nano simpleusb.conf:
> ; SimpleUSB configuration
> 
> [general]
> 
> [usb_28569]
> ...
> 
> 
> I've tried simpleusb_tune_usb.conf and simpleusb_tune_usb_28569.conf
> with and without contents.
> 
> Asterisk just dies, and tune menu does not start.
> 
> ??????
> ~Benjamin, KB9LFZ
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.