[App_rpt-users] issues with Rx audio Gm300 Repeater

[Joshua Mucinski]

All fixed.
Duplex was set to 0, should have been 1.



Thanks to all.

--
Joshua Mucinski
Jamucins at mtu.edu
616-826-2976
Mechanical Engineer
Michigan Technological University Alumi
Ham Radio Operator Extra Class - KE8CPD
I'm good on QRZ <https://qrz.com/db/KE8CPD>
KE8CPD Allstar Hub <http://44.103.33.85>
W8LRC <http://w8lrc.org>GRgives <http://grgives.com/>

On Wed, Oct 25, 2017 at 8:51 PM, <mike at midnighteng.com> wrote:

> Not fully understanding all the data you provided,
> The first stuff that comes to mind would be to check duplex mode and then
> your TX logic may be inverted AND backwards.
> You might take a moment to think what I said through. I don't have time
> for a long post.
>
> Just a few for your punch-list.
>
>
> ...mike/kb8jnm
>
>
>
> ----- Original Message -----
> From:
> "Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
>
> To:
> <app_rpt-users at lists.allstarlink.org>
> Cc:
>
> Sent:
> Wed, 25 Oct 2017 20:02:29 -0400
> Subject:
> [App_rpt-users] issues with Rx audio Gm300 Repeater
>
>
>
> Good Evening all,
> I figured I would reach out to all of you too see if anyone can help.
> Setup:
> Gm300 Rx and Tx radios
> DIAL Controller
> USB interface: RA-40 using usbradio.conf
>
> The issue I am having is with the RX audio ( i think) is not coming though
> on the tx side of the repeater. I know the tx audio is set right, since i
> can hear the announcements and they are clear. So I took apart the RX radio
> and move the jumper to position A, so its not de-emphasized audio.
>
> Things that i have done with Radio-tune-menu
> Item #2: Rx squelch set to 543
> Item#9 Success Setting=0.436243 meas=7089.0
>
> I tried running Item #3 but didnt seem to get it to work, not sure what I
> am really suppose to do with that. If anyone can help, please do.
>
> Otherwise not sure what the actually numbers mean from item #9, might help
> my brain to understand whats going on if i knew what those numbers actually
> represented.
>
> So if anyone can help me out, it would a great help to me as i have been
> beating my head against this problem for a couple days.
>
> Thanks
>
> --
> Joshua Mucinski
> Jamucins at mtu.edu
> 616-826-2976
> Mechanical Engineer
> Michigan Technological University Alumi
> Ham Radio Operator Extra Class - KE8CPD
> I'm good on QRZ <https://qrz.com/db/KE8CPD>
> KE8CPD Allstar Hub <http://44.103.33.85>
> W8LRC <http://w8lrc.org>GRgives <http://grgives.com/>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171025/a99764b4/attachment.html>